I am installing a new RST Clutch with the Tremec Magnum XL in a 2006 GT
I have a new SPEC aluminum flywheel insert. D and D said I could use this flywheel with the RST as I already had the flywheel and I am going to an 8 bolt in the winter.
The clutch disc that is on the flywheel side in hanging over the inside of the flywheel surface by a little less than an 1/8 of an inch.
I am guessing this is ok, but I wanted to make sure. The difference between the the clutch disc inside diameter and the flywheel diameter is just under a 1/4".
I do not want to put this car together and have it come apart again because the disc can not hang over the inside.
Thanks!
Personally, I'd just buy the proper flywheel. Some people run a flywheel with that overhang and don't seem to have a problem. I'd call McLeod and ask for their opinion.