Start to finish - 04 Cobra

R.D.P.

Extra Sprinkles
Established Member
Joined
Sep 25, 2013
Messages
4,620
Location
Louisville, KY area
495 torque - that has to be the highest torque number I've ever seen for a stock, unported, upper pully only terminator. And it still had a stock mid-pipe at that point?
 

bad93svt

Active Member
Established Member
Joined
Feb 9, 2006
Messages
1,749
Location
FL
How much did you gain with the gt500 tb & high boost cai vs your old set up

Honestly not sure, we did the inlet/t-body & JLT hb @ the same time.
had some tuning issues. got them sorted out but never got a new dyno sheet.
probably 25-30 hp.
 

bad93svt

Active Member
Established Member
Joined
Feb 9, 2006
Messages
1,749
Location
FL
Don't recall seeing the final data myself :poke:

Roll bar & SRA next?

I did buy a 8.8 housing from an 02 gt, hopefully after Christmas I can start putting it together.

no plans for a rollbar anytime soon...however I did finaly install some subframe connectors

20131215_113014_zpsaf6330f8.jpg

20131212_203716_zpsd219e330.jpg

coat 1
20131215_115519_zpsdca3ec1b.jpg

20131215_123254_zps44c7fc2f.jpg

finished product
20131215_141253_zps2338afe9.jpg

20131215_141301_zps1adff501.jpg

20131215_141649_zps5b3f087e.jpg

20131215_141706_zps4a82e988.jpg

20131215_141717_zpsf9a3006e.jpg

20131215_153012_zps847f8b78.jpg
 

Blk03CobraVenom

Love me some Boost
Established Member
Joined
Mar 12, 2010
Messages
2,095
Location
NJ
Awesome car and track times! :rockon:The TVS kicks ass! I just got one installed on my car this past summer, but haven't tested it's true potential on the track. Had shitty old dr's and had to launch low or walk it out to save the IRS. Tire spin was prominent. Best time was 11.7 with a 1.9 60. But my trap was 127mph so I know I got more in her.

On the dyno it made 624/560 on 93 with 18.5psi, 3.0 upper, and stock lower. Picked up some Bogart RT bigs and littles with MT ET Streets bias ply (28x15). Going back to my tuner and getting ID1000s as well and uploading a torco/race tune with 21lbs psi 2.8 upper 2lb lower. With the increased power and proper tire setup I got, I hope to get in the 10s like you this spring. :thumbsup:

Too bad you live far from me. I would love to meet up and shoot the shit. Perhaps some friendly competition as well. :-D
 
Last edited:

bad93svt

Active Member
Established Member
Joined
Feb 9, 2006
Messages
1,749
Location
FL
Awesome car and track times! :rockon:The TVS kicks ass! I just got one installed on my car this past summer, but haven't tested it's true potential on the track. Had shitty old dr's and had to launch low or walk it out to save the IRS. Tire spin was prominent. Best time was 11.7 with a 1.9 60. But my trap was 127mph so I know I got more in her.

On the dyno it made 624/560 on 93 with 18.5psi, 3.0 upper, and stock lower. Picked up some Bogart RT bigs and littles with MT ET Streets bias ply (28x15). Going back to my tuner and getting ID1000s as well and uploading a torco/race tune with 21lbs psi 2.8 upper 2lb lower. With the increased power and proper tire setup I got, I hope to get in the 10s like you this spring. :thumbsup:

Too bad you live far from me. I would love to meet up and shoot the shit. Perhaps some friendly competition as well. :-D

Sounds awesome...post a pic!
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,650
Location
Cheshire, CT
I did buy a 8.8 housing from an 02 gt, hopefully after Christmas I can start putting it together.

no plans for a rollbar anytime soon...however I did finaly install some subframe connectors

20131215_153012_zps847f8b78.jpg

Just WOW!

Blk03CobraVenom, your have an really good looking/nicely modded Terminator, too! :rockon:
 

Senkak

SVT Poster
Established Member
Joined
Sep 16, 2005
Messages
5,643
Location
Orlando
Thanks! Don't have a pic with the new shoes yet. But here's one of the engine bay and my ccws.

P1020162_zps4373d2a0.jpg


Cobraafterdetail_zps3b559dc0.png

Great looking car Carlos!
What STB is that?
I have been asked several times if a STB will fit with the VMP TVS.
Now I have the answer!!
Thanks!
Rick
 

Users who are viewing this thread



Top