I have read so many post on this and still I find myself questioning my set points. Driveshaft pointing down in rear so this is negative and my setting is -3.5. The rear end pinion is pointing down so this is also negative and my set point is -1.5. The car is a 11 gt500 stock ds with lca's and the adjustable uca. I checked the ds close to the rear end and the pinion on the small flat spot on the pinion by where the u joint is. I tried to keep it close to the 0 pinion angle but it left me with 0 and -4 which was not right.
Any thoughts
Any thoughts