Selling my turbo 98 Cobra. UPDATE: Price drop to $10,000 obo. I am giving this thing away, but i need it gone ASAP, i have had something come up that needs to be taken care of. Here is a basic rundown of the car:
Engine:
•Sean Hyland Cobra Forged Shortblock
•Production Italian Teksid Aluminum Block
•1400 HP capable
•NEW Forged Steel Cobra Crankshaft
•Manley CNC I Beam Connecting Rods, Shot Peened, 4340 Steel
•Manley Custom Forged Pistons (2618 high strength material)
•HD Molybdenum Steel Piston Rings
•ARP Main Bolts
•FM Race Main and Rod Bearings
•SHM Billet Aluminum Main Stud Girdle
ARP Head Studs
Short Runner Cobra Intake
Sean Hyland Cams- 225/235
Accufab Single Blade Throttle Body
Fuel System:
Granatelli Pickup
Aeromotive A1000 Pump
Aeromotive 100 Micron Fuel Filter
-8an Feed and -6an Return
Aeromotive A1000 Fuel Pressure Regulator
Custom Fuel Rails
Siemens Deka 60lb Injectors
Power Adder:
Custom 76mm single turbo kit
ITS 76mm Turbo .96 A/R
4” Intercooler
Turbonetics 38mm Wastegate
Greddy Profec B spec II Boost Controller
Vortech Race Blow Off Valve
SCT BA3000 MAF
Transmission/Drivetrain :
Tremec T45 5 speed manual transmission
Ram Powergrip HD Clutch and Flywheel
31 Spline Rear with 3.55 Gears
Gauges
Autometer Phantom Boost and Fuel Pressure
The car is clean, has clear SC Title and 62k miles and some change. Had it tuned a few weeks ago, it made 601rwhp at 14.8 psi. The car does not idle good, i have checked for vacuum leaks, none found. Swapped IAC valves, checked TPS and all seems to be good. My only guess is the cams are causing the rough idle. I have a binder full of receipts for everything done to the car, totaling over $36k not including the price of the car. The turbo/built motor setup has right at 20k miles on it. Asking price is $10,000 OBO. Trades will be considered but i will need cash on top. You couldn't build this car for a fraction of this. PM for any info, thanks!
-Blake
Engine:
•Sean Hyland Cobra Forged Shortblock
•Production Italian Teksid Aluminum Block
•1400 HP capable
•NEW Forged Steel Cobra Crankshaft
•Manley CNC I Beam Connecting Rods, Shot Peened, 4340 Steel
•Manley Custom Forged Pistons (2618 high strength material)
•HD Molybdenum Steel Piston Rings
•ARP Main Bolts
•FM Race Main and Rod Bearings
•SHM Billet Aluminum Main Stud Girdle
ARP Head Studs
Short Runner Cobra Intake
Sean Hyland Cams- 225/235
Accufab Single Blade Throttle Body
Fuel System:
Granatelli Pickup
Aeromotive A1000 Pump
Aeromotive 100 Micron Fuel Filter
-8an Feed and -6an Return
Aeromotive A1000 Fuel Pressure Regulator
Custom Fuel Rails
Siemens Deka 60lb Injectors
Power Adder:
Custom 76mm single turbo kit
ITS 76mm Turbo .96 A/R
4” Intercooler
Turbonetics 38mm Wastegate
Greddy Profec B spec II Boost Controller
Vortech Race Blow Off Valve
SCT BA3000 MAF
Transmission/Drivetrain :
Tremec T45 5 speed manual transmission
Ram Powergrip HD Clutch and Flywheel
31 Spline Rear with 3.55 Gears
Gauges
Autometer Phantom Boost and Fuel Pressure
The car is clean, has clear SC Title and 62k miles and some change. Had it tuned a few weeks ago, it made 601rwhp at 14.8 psi. The car does not idle good, i have checked for vacuum leaks, none found. Swapped IAC valves, checked TPS and all seems to be good. My only guess is the cams are causing the rough idle. I have a binder full of receipts for everything done to the car, totaling over $36k not including the price of the car. The turbo/built motor setup has right at 20k miles on it. Asking price is $10,000 OBO. Trades will be considered but i will need cash on top. You couldn't build this car for a fraction of this. PM for any info, thanks!
-Blake
Last edited: