hey when you had the front case back on were you able to turn the input shaft easily with your hand?
Jan 24, 2014 #141 swimchamp8107 Member Established Member Joined May 27, 2011 Messages 35 hey when you had the front case back on were you able to turn the input shaft easily with your hand?
May 9, 2014 #142 stradt03 Active Member Established Member Joined Nov 13, 2000 Messages 1,298 Location North Carolina Digging up this thread again. I have a damaged 26-spline shaft. If I replace it with a new 26-spline shaft, the need to change the shim should be minimal right? When removing the input shaft once the front cover is off, does the shaft simply slide out or are there additional steps necessary to remove it? I will attach a picture of the damaged shaft later this afternoon.
Digging up this thread again. I have a damaged 26-spline shaft. If I replace it with a new 26-spline shaft, the need to change the shim should be minimal right? When removing the input shaft once the front cover is off, does the shaft simply slide out or are there additional steps necessary to remove it? I will attach a picture of the damaged shaft later this afternoon.
Apr 3, 2015 #143 C Chrisds302 New Member Established Member Joined Mar 9, 2014 Messages 11 Location Indy Where do I order that .034 shim? If I need it?
Apr 3, 2015 #144 Rich'sTRsvt Active Member Established Member Joined Oct 28, 2012 Messages 798 Location Madison, WI Chrisds302 said: Where do I order that .034 shim? If I need it? Click to expand... Lethalperformance still has a liberty shim kit.
Chrisds302 said: Where do I order that .034 shim? If I need it? Click to expand... Lethalperformance still has a liberty shim kit.
Apr 17, 2015 #145 chitowncobra Active Member Established Member Joined May 3, 2003 Messages 950 Location Clearwater Florida subscribing good write up w/pics!
Aug 26, 2016 #146 xhodzax Member Established Member Joined Apr 23, 2013 Messages 136 Location minneapolis mn subscribing to this post thinking about doing this myself but not 100% sure i'm up for it.
Jan 15, 2017 #147 Gokracer1 New Member Established Member Joined Dec 19, 2016 Messages 13 Nice Write Up! Will be tearing into this next weekend. Last edited: Jan 25, 2017
Jan 31, 2017 #148 B Bbslovr69 New Member Joined Jan 31, 2017 Messages 2 Can someone please give me a little more info on how to install the 26spline inoutnshaft ? Everything is off and when I install the shaft the cover doesn't want to close thanks !
Can someone please give me a little more info on how to install the 26spline inoutnshaft ? Everything is off and when I install the shaft the cover doesn't want to close thanks !
Feb 1, 2017 #149 B Bbslovr69 New Member Joined Jan 31, 2017 Messages 2 So I found out I have the 26 spline with 29 teeth gear which is 2.97 vs the 31 which is 2.66. I also noticed a few shims were used to eliminate end play. Since I have no use for the 26 spline 31 teeth I'm selling it for $270 shipped if anyone is interested.
So I found out I have the 26 spline with 29 teeth gear which is 2.97 vs the 31 which is 2.66. I also noticed a few shims were used to eliminate end play. Since I have no use for the 26 spline 31 teeth I'm selling it for $270 shipped if anyone is interested.