Perfect!!! I'm considering going with this tire size next go around. I'd like to get the car off of the ground some without adding too much gap. Going to p springs will help but both will make driving over bumps much easier.
Official: 2011+ Mustangs Wheel and Tire thread
- Thread starter BUstang
- Start date
Mickey Thompson Street Comp Tires & SC-5 Wheels
The Mustang is a little older...
The 255/35R20 (Front) & 275/35R20 (Rear) may be a better fit on the '11 - '14 GTs with these offsets.
The Mustang is a little older...
- Front Tires: 275/35R20 Mickey Thompson Street Comp
- Rear Tires: 305/35R20 Mickey Thompson Street Comp
- Front Wheels: 20X9.0, +32 Offset Mickey Thompson SC-5 (Hyper Silver)
- Rear Wheels: 20X10.5, +45 Offset Mickey Thompson SC-5 (Hyper Silver)
The 255/35R20 (Front) & 275/35R20 (Rear) may be a better fit on the '11 - '14 GTs with these offsets.
I put these up in the lowered 2013's thread, but thought it could be useful here too.
20X9 and 20X10.5 Vossen CV3-R's. Currently on Eibach pros and just bought some BMR Sp009's. Really hope for it to be a touch lower.
20X9 and 20X10.5 Vossen CV3-R's. Currently on Eibach pros and just bought some BMR Sp009's. Really hope for it to be a touch lower.
RTR's on my Buddies 2011 5.0 255/40/19 + 285/40/19
RTR's on my vert
What rear bumpers are on the 2011's? Stock on the blue car and RTR on the red??
Last edited:
Cobra/Boss on the blue car and RTR on the red.
nice Whistlers HEMI^^^ I debated those for a while! I also debated some ESR wheels that looked like your old ones haha, I like your style!
some more shots of my setup I posed before.
with taylor12gt
some more shots of my setup I posed before.
with taylor12gt
I'm on K springs atm but considering going to P springs or Steeda Sport springs. I need a little more room. Exhaust rubs a tad going into my garage(just bought a house). Also, I'm consodering going 265/40/19 & 305/35/19 which will give me .4-.5", closer to stock tire height. Thoughts??
Here's my 2012 GT Premium, Black with Saddle interior:
RTR 19x9.5's
MPSS 255/40 & 285/40
Roush side and rear splitters
Boss Fascia and front splitter
GT500 rear spoiler
Eibach prokit & Koni dampers, adj. phb
GT500 AB's, Bama tune & Airaid intake
JL Audio speakers & dynamat
Stage 2 paint correction & opticoat
Soon to be Whipple'd
RTR 19x9.5's
MPSS 255/40 & 285/40
Roush side and rear splitters
Boss Fascia and front splitter
GT500 rear spoiler
Eibach prokit & Koni dampers, adj. phb
GT500 AB's, Bama tune & Airaid intake
JL Audio speakers & dynamat
Stage 2 paint correction & opticoat
Soon to be Whipple'd
Last edited:
Hey all, I know this thread has fizzled out of late but you guys seem to know your stuff. I have a 13 GT with a 1" drop at the moment. I bought the car with 18" AMR's on it with stock 235/50 tires on it. I am in need of new tires and obviously would love to go wider all around as well as going to 20" rims. I've been looking around for the past 2 weeks to see what style wheel I liked most and I absolutely love the Bravado Tributes. Unfortunately they are hard to come by for a decent price. I found them on Summit for a good price and they are 20x11 50mm offset and 20x9 35mm offset. My main questions are first would these sizes work and 2nd what size tire do you recommend for these size rims? I would like to keep the rear no bigger than 295 and front 255. Any advice would be greatly appreciated. Thanks!!
that sounds like a good setup, it will all work, IMO the rear would look good with a 295/30/20. but some people like the look of a 35 better.
the fronts I would go with a 255/35/20 and be done! a 20x11 will work and that offset is spot on, some like to go 52-54 I think but I'm not sure
the fronts I would go with a 255/35/20 and be done! a 20x11 will work and that offset is spot on, some like to go 52-54 I think but I'm not sure
Thanks for the response! I have noticed a lot of people preferring the 295/35 instead of the 30 ... Any reason why?? And as far as the rear tires go, it is SOOOO much harder to find 295/30's than it is 285/30's .. I just worry that the 285's on a 20x11 rim would be cutting it close..
Guys, no offense, but this thread is not for asking questions about what setup to go with. This is a thread to post pics of your setup and give the specs. Read the original post.
Wheel Manufacturer: Velgen
Wheel Style: VMB7 Silver
Wheel size and width:
-Front Wheel Size: 20x9 Backspacing: 6.38 Offset: +35mm Lug Pattern: 5x114.3 Weight: 27 lbs
-Rear Size: 20x10.5 Backspacing: 7.52 Offset: +45mm Lug Pattern: 5x114.3 Weight: 28 lbs
(Wheels clear Brembo brakes)
Tire manufacturer: Nitto
Tire size and width:
Front Tire: NT555 G2 255/35R20
Rear Tire: NT555 G2 305/30R20
Any lowering modifications: Brembo50.com 55D Springs (rear only) (bunch of Steeda bits on order)
Last edited:
Front and rear 20x10 Niche Milan wheels, 40mm offset.
Front tires: Nitto 555 G2 275/35/20
Rear tires Nitto 555R 305/35/20
Front springs: Steeda Sport
Rear springs: Steeda coilover springs with adjustable spring perch
Front tires: Nitto 555 G2 275/35/20
Rear tires Nitto 555R 305/35/20
Front springs: Steeda Sport
Rear springs: Steeda coilover springs with adjustable spring perch
Love the wheels
Nice wheels
Nice wheels
Last edited:
Users who are viewing this thread
