cobra pricing?

nxhappy

Well-Known Member
Established Member
Joined
Dec 16, 2006
Messages
10,031
Location
AZ
she's REAL dirty now (from the ****ing snow and rain) LOL. She needs a full detail and inside cleaning.

Oh, and the mirror is looser than a 50 year old hooker. Gotta pull that off and fix it.

I also noticed, the shifter is about 10 feet away from my arms. I feel like a damn T-Rex hahaha ...
 

03cobra#694

Good Guy
Super Moderator
Joined
Nov 12, 2003
Messages
62,874
Location
SW FL.
she's REAL dirty now (from the ****ing snow and rain) LOL. She needs a full detail and inside cleaning.

Oh, and the mirror is looser than a 50 year old hooker. Gotta pull that off and fix it.

I also noticed, the shifter is about 10 feet away from my arms. I feel like a damn T-Rex hahaha ...
There's mirror shake fix thread in the Terminator section, somewhere.
 

choate

Drive with a sparkling glove on your shift hand
Established Member
Joined
May 10, 2012
Messages
1,431
Location
Saginaw, TX
she's REAL dirty now (from the ****ing snow and rain) LOL. She needs a full detail and inside cleaning.

Oh, and the mirror is looser than a 50 year old hooker. Gotta pull that off and fix it.

I also noticed, the shifter is about 10 feet away from my arms. I feel like a damn T-Rex hahaha ...

Mine has the mirror shake too. Also, don't know about yours but apparently the seat belts not retracting is a known problem too. Mine had that bad. I replaced the seatbelts. Oh and as far as shifters, look into MGW. Mine came with a UPR and it's decent enough I'm going to leave it alone. Here is the mirror fix
https://www.svtperformance.com/forums/threads/30-second-shaky-mirror-fix.617075/
 

nxhappy

Well-Known Member
Established Member
Joined
Dec 16, 2006
Messages
10,031
Location
AZ
thanks for the tip I've been reading on the mirror issue. I'll try to fix it tonight.
 

nxhappy

Well-Known Member
Established Member
Joined
Dec 16, 2006
Messages
10,031
Location
AZ
lol as of now the seat belts seem OK. I did notice the road noise from the gear shift area is LOUD. Is there anything that will lessen that sound?
 

Iamchris

Shakey Snake
Established Member
Joined
Sep 21, 2004
Messages
2,133
Location
Mass.
Yep. You can get a gasket, check the sticky on the Cobra section. I'd link it but I'm on my phone.
 

IllCobra

Active Member
Established Member
Joined
Sep 26, 2008
Messages
951
Location
Florida
Congrats! Silver is one of my top 3 colors for cobras.

p.s. link that's inside to the shaky mirror fix isn't working... how do i remove the mirror?
 

nxhappy

Well-Known Member
Established Member
Joined
Dec 16, 2006
Messages
10,031
Location
AZ
Congrats. What are your initial impressions?


Sent from my iPhone using Tapatalk

I really like this car. The motor has some balls (even w/ zero mods right now). She was real smooth on the highway. Sounds pretty good too (stock cats and magnaflow). Although I will probably throw on a offroad midpipe. Still getting used to the shifting....It's WAY different than the Viper lol.
 

03cobra#694

Good Guy
Super Moderator
Joined
Nov 12, 2003
Messages
62,874
Location
SW FL.
I really like this car. The motor has some balls (even w/ zero mods right now). She was real smooth on the highway. Sounds pretty good too (stock cats and magnaflow). Although I will probably throw on a offroad midpipe. Still getting used to the shifting....It's WAY different than the Viper lol.
Time to start reading. New shifter and the anti venom mod.
 

KennyBrownCV

New Member
Established Member
Joined
Jun 24, 2015
Messages
13
Location
US-Ohio
Lol at people still complaining about cobra prices.... then comparing them to mass produced GTs which a million of them are made.

Sorry guys, a car that was only made 2 years, is highly sought after, and only had about 18k made in that 2 year span (with much less around now due to many being crashed and destroyed) is going to keep prices high, and soon rising.
Almost sounds like you're describing my Marauder, except that they made only 11,000 of those over 2003-2004.

Sent from my SM-G935T using Tapatalk
 

Users who are viewing this thread



Top