Car is currently running 21psi on a KB2.2 Gen 1. Looking to get out of the ragged edge right now, can I drop it down to 19psi (or whatever is recommended) without the car running hella rich? Would I need to have the car re-tuned?
Less boost is OK Corbic! It won't run rich!Car is currently running 21psi on a KB2.2 Gen 1. Looking to get out of the ragged edge right now, can I drop it down to 19psi (or whatever is recommended) without the car running hella rich? Would I need to have the car re-tuned?
Car is currently running 21psi on a KB2.2 Gen 1. Looking to get out of the ragged edge right now, can I drop it down to 19psi (or whatever is recommended) without the car running hella rich? Would I need to have the car re-tuned?
Sweet! So do a 4th gear pull from a 40mph roll, and go WOT and it should hold 11.5!I have an AEM UGEO.
WrongI'm at 610HP at the flywheel, and 518rwhp
What happened Corbic? Block me for what? Helping you?Just block him.
All you have to do is go to YouTube and search
(Bill Putnum Ecoboost) or (Brad Gusler Ecoboost) or
(Lund Racing Ecoboost)!
Your a bitch Corbic! Punk!
Sent from my Z812 using Tapatalk
Can we please now ban the 3rd grader, for insulting outside of SD? I think we’ve seen every possible angle of his stanced out ecoboost at this point.
What happened Corbic? Block me for what? Helping you?
Sent from my Z812 using Tapatalk
Corbic, its always OK to decrease boost! When you increase boost it will hold 11.5 as long as you don't exceed your injectors and fuel supply! So you can increase boost and not need a retune, as long as your injectors ad fuel supply can keep up!
I have 60lbs injectors with a KB BAP! I'm at 610HP at the flywheel, and 518rwhp! I've got room to increase a little bit!
Sent from my Z812 using Tapatalk