You should move the fuse box to the fender while you are at it. Cleans it up nice:
View attachment 1519379
I take it I should of went with ptfe.What fuel lines are those? PTFE I hope.
Sent from my Moto E (4) Plus using the svtperformance.com mobile app
Yes if you don't want fuel smell.
Yes if you don't want fuel smell.
Sent from my Moto E (4) Plus using the svtperformance.com mobile app
I do not believe that is PTFE hose. I did not think Fore had black PTFE line so I ordered mine through summit.
This is what i used in my engine bay.
https://www.summitracing.com/parts/fra-601028/overview/
Thanks. I’ll have to make this a future project. Wish I would just ordered the ptfe lines from the beginningMostly Fore fittings but I did order some additional Fragola PTFE fittings. Fore and Fragola are probably the best in the business.
I had two of these for the balance line in the rear of the blower
https://www.summitracing.com/parts/fra-684508-bl
one going to the y-block and two leaving the y-block. I did not have the F4i regulator.
https://www.summitracing.com/parts/fra-680108-bl
two of these for the fronts of the rails.
https://www.summitracing.com/parts/fra-681808-bl
Adding that hose does not bend as easy as the FlexLP hose.
Mostly Fore fittings but I did order some additional Fragola PTFE fittings. Fore and Fragola are probably the best in the business.
I had two of these for the balance line in the rear of the blower
https://www.summitracing.com/parts/fra-684508-bl
one going to the y-block and two leaving the y-block. I did not have the F4i regulator.
https://www.summitracing.com/parts/fra-680108-bl
two of these for the fronts of the rails.
https://www.summitracing.com/parts/fra-681808-bl
Adding that hose does not bend as easy as the FlexLP hose.