2001 Cobra
100000 mi
No drivetrain mods
I recently replaced a bad throw out bearing and in the process I made the rookie mistake of crushing the transmission wiring harness between the bellhousing and engine. The connector box is straight mangled. The car still shifts fine but my issues now are
-no reverse lights
-no odometer
-sometimes when I put the clutch in it doesnt idle and dies (neutral sensor?)
-doesnt idle high and then drop when you stop.
These all seem to stem from the crushed connector as I checked all the plugs and wires that plug into the trans and they connect fine/no broken pins or wires.
So..if I done messed up bad, what is the best way to fix/repair the wiring harness connector?
100000 mi
No drivetrain mods
I recently replaced a bad throw out bearing and in the process I made the rookie mistake of crushing the transmission wiring harness between the bellhousing and engine. The connector box is straight mangled. The car still shifts fine but my issues now are
-no reverse lights
-no odometer
-sometimes when I put the clutch in it doesnt idle and dies (neutral sensor?)
-doesnt idle high and then drop when you stop.
These all seem to stem from the crushed connector as I checked all the plugs and wires that plug into the trans and they connect fine/no broken pins or wires.
So..if I done messed up bad, what is the best way to fix/repair the wiring harness connector?