Thats great power NA, 1000lbs lighter than a hellcat, sheeeeee!
Motor is right around 10-1, well to be more accurate it’s 11-1 but the cam bleeds it down to about 10-2-1 or round aboutsComing along very nicely. Did you mention how much compression you're running with the combo?
Had to change the headers out and modify the x pipe, and tuned it in a bit more, made some decent gains after some growing pains.
I cannot stress enough how much a load bearing dyno helps vs just spinning the rollers. Without the load I wouldn’t have found out a fuel pump issue I was having. Loaded the dyno up to 4k lbs and let the car rip and found the load in 3rd was dropping the fuel pump pressure to 2psi. The issue wasn’t seen when we spun the dyno with less load.
Aeromotive 340 pump just can’t support a 800hp carbed motor even though the pump was rated at 1000hp. Changed it to a walbro 550 and fixed all my fueling issues.
Same dyno as last time where I make 600whp( same one where a Redeye put down 580) I went from 40* total to 34* and changed the 1250 Dominator to a 1050 Dominator, made 608whp (showed 828 to the motor)at 4k load. This is all done on 91 octane.
Car black tracks everywhere now, and is pretty snappy. Butt dyno says it’s pretty quick. I’d guess it’s a 140mph car crossing the stripe or close to it which was the goal to have a pump gas car I can beat on. Once I move and have access to 93 octane I’ll bump the timing up 4* and see what happens.
My grandmother had one, same colour with a small V8, 267?View attachment 1585744 How’s this for some nostalgia... me as a little kid and our Malibu