Need a shop

[Mach 1 Boy]

Im looking for a shop or someone who can help me with finishing the install of my nitrous kit. I had a shop but the F@#ked me by doing a crappy job then wanting me to spend an 800 extra dollars to do a better job:cuss:--Plz help. I'm located in Kennesaw if that helps--Randy

 

[Fade 2 Black]

Where are you located in GA?

 

[Mach 1 Boy]

Kennesaw. I was using modular power house put the owner is kind of an Jerk

 

[Fade 2 Black]

What needs to be done? I'm sure someone local can either help you out or point you in the direction of someone reputable. :beer:

 

[F8LSNAKE]

What exactly was wrong with the initial install? I thought MP was generally thought of as pretty reputable, but I understand how everyplace seems to have problems here and there. Just curious as to what happened. Maybe try MVperformance(Tim Matherly).

 

[orange2004cobra]

+1 on MV...
Get a tune while your there...

 

[Smacked_in_ATL]

Kennesaw. I was using modular power house put the owner is kind of an Jerk

Take it to Injected Engineering off Jiles/Moon Station. They do good work, they have my car right now!

I've heard that MPH doesn't not like to mess with certain setups. I heard that Tim will also only tune stock 03/04 blowers, Steggy's, and KBs. For some reason he won't touch Whipple. Guess because they are a little harder to tune and they don't like ANY kickback at MPH.

**And this was from an owner of an 03 KB Cobra that had his car tuned by Tim.**

 

[Mach 1 Boy]

where exactlyis Injected engineering? I live right by jiles and wadegreen.

 

[Smacked_in_ATL]

From 41, take Jiles past Legacy Park and make a right on Moon Station Road. Take the first left onto Kennesaw Industrial Parkway. And make the immediate left into the driveway and they are back there on the end. When you make the left into the driveway, bear to the left and goto straight back. You'll see Mustangs out there too probably.

 

[bigwill306]

Take it to Injected Engineering off Jiles/Moon Station. They do good work, they have my car right now!

I've heard that MPH doesn't not like to mess with certain setups. I heard that Tim will also only tune stock 03/04 blowers, Steggy's, and KBs. For some reason he won't touch Whipple. Guess because they are a little harder to tune and they don't like ANY kickback at MPH.

**And this was from an owner of an 03 KB Cobra that had his car tuned by Tim.**

i've heard some of the same things, if they cant figure it out they send you somewhere else

 

[chopps]

Maybe try MVperformance(Tim Matherly).<-- where is he out of curiousity ?

I heard that Tim will also only tune stock 03/04 blowers, Steggy's, and KBs. For some reason he won't touch Whipple. Guess because they are a little harder to tune and they don't like ANY kickback at MPH. <---------- Bullseye

And they edit/delete your posts on there forums to suit there needs because they don't like competition and will delete your post to prove it !!

Also in there defense they did tune my car and even though there were tons of problems he stuck with it and fixed it and its right now.
Glad its over though

 

[Fade 2 Black]

Statham, GA

 

[AmazonTuning]

how close are you to Anderson SC? we get alot of guys up here from GA

 

[Mach 1 Boy]

how close are you to Anderson SC? we get alot of guys up here from GA

Not sure exactly. Im about an hour and 10 minutes south of chattanooga TN if that helps. A couple of days ago I just found out the money I spent to have my car tuned wasn't tuned at all just a flash WTF. Shouldn't tell ppl that they are getting tuned if its just a flash IMO.

 

[chopps]

Not sure exactly. Im about an hour and 10 minutes south of chattanooga TN if that helps. A couple of days ago I just found out the money I spent to have my car tuned wasn't tuned at all just a flash WTF. Shouldn't tell ppl that they are getting tuned if its just a flash IMO.

I hate to ask but who did that to you ?
just to verify

 

[2Marauders]

I've heard that MPH doesn't not like to mess with certain setups. I heard that Tim will also only tune stock 03/04 blowers, Steggy's, and KBs. For some reason he won't touch Whipple. Guess because they are a little harder to tune and they don't like ANY kickback at MPH.

They tune anything except Whipple. That's because they have a close relationship with KB, and Whipple is the primary KB competition so they don't tune Whipple cars in support of KB. They install and tune Turbos (twin or single), Centrifugal blowers (Vortech, ProCharger), Twin screw blowers (Kenne Bell) as well as OEM and ported Cobra blowers.

 

[TAF]

Take it to Injected Engineering off Jiles/Moon Station. They do good work, they have my car right now!

I've heard that MPH doesn't not like to mess with certain setups. I heard that Tim will also only tune stock 03/04 blowers, Steggy's, and KBs. For some reason he won't touch Whipple. Guess because they are a little harder to tune and they don't like ANY kickback at MPH.

**And this was from an owner of an 03 KB Cobra that had his car tuned by Tim.**

+1000 on Aric @ Injected Engineering... www.injectedengineering.com


The ONLY one I'll let tune my Marauder...and the BEST there is at it, in my opinion!

 

[Smacked_in_ATL]

+1000 on Aric @ Injected Engineering... www.injectedengineering.com


The ONLY one I'll let tune my Marauder...and the BEST there is at it, in my opinion!

Is that your black Marauder with the Vortech? I've seen it there I think.

And I'm glad Mach1Boy and Tim have straightened things out. We don't need anyone pissed at any shops, and vice versa!

And Tim, you probably would have gotten my business, but you were too booked up!!

 

[Fade 2 Black]

Glad you got it worked out. :beer:

 

[martyo]

Not that Tim and MPH need my support but they have it. Those boys simply rock.

Thanks to Jeff (on the wrenches) and Tim (on the keyboard) , my Cobra is just about done!

Spun the rollers to the tune of 625 rwhp. :beer: 625 on pump gas and the car is completely streetable. There aren't a lot of people that can tune like that. Trust me I have seen my share of rattled motors!!

Here is the dyno sheet for my Cobra: