Recent content by 01cobracmdr

I've been searched through old threads and haven't found anything recent for tuners in the valley area. Last post was from early 2014 and it was Devin at ADS. Just wondering if he was still the go-to guy or if there was somewhere around that was a good place to go to. I have and 01 stroked 5.0...

I have an 01 Cobra with a 5.0, stage 3 crower cams, P&P heads, 90mm MAF, JLT CAI, 62mm Throttle body, long tubes, O/R x, SLP LM1s, 03 injectors. I need a new tune (just moved from CO to AZ) and I'm getting new coils and plugs. I need to know, what plugs should I get and have them gapped at? I've...

I'm just curious as to how it would look. I've seen them on a sonic blue but not a laser red or Redfire. Thanks. Also, if you want to see/hear my 5.0 stroker build and how it turned out add me on Instagram-thedavidg. I've got some good pics, videos on there. I have a hard time loading them on here

I just got in a GT super car pump from lethal. My car has been having a few issues missing and I was thinking fuel would be the issue. Anyways, is this a direct replacement from stock? Any additional hardware/items needed? I already have a KB boost-a-pump. Soon I'll be saving up for an E85...

I have a set of H&R race springs and I was wondering if I need to get new C/C plates to be able to get the alignment in spec. Or is it a "Might as well do it" things while installing the springs? And if that's the case, "Might as well get struts/shocks while I'm at it" too? Hahaha What brand C/C...

Just wanted to see what everyone thinks about these options we have for our car. What would you choose? Why? Pros and cons of the three? Within a year I plan of boosting my car, yes I have forged internals, and torn between the 3! Aren't we all??? Lol Well, lets hear it SVTP, if you had a blank...

I jut did a compression test on my 01 and from what I'm seeing it looks like about half of the psi from what I've been seeing. My cylinders read 90 psi. It looks like on others it's more like 180 psi. Could this have been from me not "cranking" it long enough? I just held the accelerator and...

I just put my stroker in (cammed, 90mm MAF, 62mm TB, 39lb/hr injec, full exhaust, kb BAP) and I keep getting a misfire. I've taken out all injectors and cleaned them and moved them to diff cylinders. Same with spark plugs and COPs. Spark plugs are brand new OEM plugs, COPs are stock and...

1st Question- I want to go with the side exit exhaust for my car, I'm a big fan of the look. I want to know if anyone knows if it will fit with FLSFCs? Maybe a little "convincing" with a hammer? lol 2nd Question- I want to put some HIDs for my headlight, what are you guys using? Where did...

Just like it says, I want the Roush side skirts and the rear bumper exhaust hole covers. I live in Colorado Springs. Thanks

Just got some new wheels, 315/35/17, and they are rubbing against a bracket that the IRS subframe bolt goes into. I have the low-pro bolts but like I said, it's rubbing a bracket on there....WTF?? Ideas?

I just put my motor in yesterday and there's a few issues I'm having. I'm getting a u1262 code. My car also won't idle. I have to hold the throttle down a little to start it and the keep it depressed to keep it running. If I let off the throttle, it dies. One other thing, I had a 90mm lightning...

My 01 is finally getting its motor after 5 months of not having it. I have a 5.0 stroker mmr short block 9.8:1, stage 3 crower cams that have been degreed, ported heads/intake manifold, 90mm mas, jlt CAI, 62mm ported BBK TB, BBK LT headers, O/R x-pipe, SLP LM1s, 39 lb/hr injectors and a bitchin...

I have a set of stage 3 crowers and I'm having trouble degreeing them. I have the degree wheel and a dial indicator but I'm not having luck and I want to make sure I do it right. Do you know of anywhere I can look at some tutorials or a step by step guide? Or if any of you have done it, some...

I just got my motor together, 5.0 stroker, and I'm putting in back in my 01 Cobra. It has BBK LTs and I'm wondering what the best way to put it back in the car is. Remove the trans? And past experience and advice on how to do it would help out. Thanks.