Recent content by C666

Sorry cell phone pics HPP upper intake, accufab TB, 1500hp a2a, 4" cold side, fwd facing headers, 2.5" Y pipe t6 flange, turbosmart 60mm, race bov, stainless steel 4" down pipe and mid pipe with cutout. $4000 Gt4780 with polished antisurge delete cover and .96 $1200...

Sorry cell phone pics HPP upper intake, accufab TB, 1500hp a2a, 4" cold side, fwd facing headers, 2.5" Y pipe t6 flange, turbosmart 60mm, race bov, stainless steel 4" down pipe and mid pipe with cutout. $4000 Gt4780 with polished antisurge delete cover and .96 $1200...

Sorry cell phone pics HPP upper intake, accufab TB, 1500hp a2a, 4" cold side, fwd facing headers, 2.5" Y pipe t6 flange, turbosmart 60mm, race bov, stainless steel 4" down pipe and mid pipe with cutout. $4000 Gt4780 with polished antisurge delete cover and .96 $1200...

Thinking of selling my streetable turbo kit the goal was to drive to the track run 8's and drive home on pump gas... we went 8.5 with stock heads stock cams stock compression... I rarely drive the car anymore smog is a pia here so thinking about going race car air to water fwd facing turbo etc...

1.30 5.48 128.9 8.54 159.5 Made three more passes 8.55 8.57 8.57 Changed the shocks and went from a 3.55 to a 3.73 she seems to like the gear but way past the power band of the stock cams I think.... spun her to 7200

Step 1 krinkel black paint Step 2 smooth fill paint fenders and firewall and some black AN fittings and fuel line The downpipe will be 5" Aluminum soon and I already have Black plug wires The question is what should I polish I like the Black and the Sonic Blue together but think I...

Great day at the track 9.1 9.0 9.0 8.9 and 9.0 22psi 15deg E85 car is going left and pulling tire a little too much but geting there little by little and we got a few decent 60's 1.38 1.34 1.37 1.40 and 1.41 hopefully the next time out we can get her to go straight... Stock Heads Cams CR new...

Great day at the track 9.1 9.0 9.0 8.9 and 9.0 22psi 15deg E85 car is going left and pulling tire a little too much but geting there little by little and we got a few decent 60's 1.38 1.34 1.37 1.40 and 1.41 hopefully the next time out we can get her to go straight... Stock Heads Cams CR new...

0-60mph? And how did you measure it: Gtech? Vericom? Other?

0-60mph? And how did you measure it: Gtech? Vericom? Other?

I just did RaceCrafts Manual Master Cylinder Kit how do I trigger the brake lights? I was told they would just work what am I missing?

Per Mark AKA Buster: This is the only converter that works, it makes the car, it will spool a 76-88 and ran 2mph faster then the tightest lentech we tested truely the best of both worlds BTW if you dont know Fast Mark aka Buster he had the fastest stock 4.6 in his 03 Cobra best ET 8.9 MPH 159...

Fully built 1,000 hp glide with JW housing (bolts up to 4.6) Hutch hardened gearset Upgraded clutches Transbrake Flexplate Only 10 passes since it was freshened up this is my backup glide. We went from a built Lentech 4r70w to this glide last season On low boost she ran 11.0 with...

I have 6 low mileage 03/04 rods and 13 .20 over pistons $45ea These came from factory rebuilt motors. Sold 6/8 thanks tony still have 5 pistons left

Per Mark: This is the only converter that works, it makes the car, it will spool an 88 and ran 2mph faster then the tightest lentech we tested truely the best of both worlds BTW if you dont know Mark aka Buster he had the fastest stock 4.6 in his 03 Cobra best ET 8.9 MPH 159 and is well known...