Selling my 1999 Cobra currently listed on craigslist. Looking to get $9,200
https://boston.craigslist.org/gbs/cto/5762462844.html
Many upgrades to this car:
Shortrunner intake
JBA Shorty Headers
JBA 3" exhaust
SLP catted X-pipe
410 Ford Racing gears
March Underdrive pullies
Accufab 60mm...
Hi Guys,
Just wanted to give a quick plug to Mike Hall at Hall's Custom Automotive in Hanover for helping me out with some items I needed welded on my car. If you need welding or anything racing especially chassis related give Mike a call.
http://racecarsbyhalls.com/
He is busy but a tour is...
Hello All,
I am looking for Weld Racing AlumaStar 2.0 1-Piece black anodized (Weld on the lip). I did find a thread that said run:
Front 15x4 1.50 back spacing
Rear 15x8 5.5 back spacing
Problem is I do not see this model and size anywhere.
Is anyone running this setup?
Thank You
Hi Guys,
Thought I would offer these here locally first. Set of stock valve covers from my 99 Cobra great shape. Perfect for the SN95 coil swap. Looking for $50 local pickup.
Hi Guys,
Maybe just me being new to the line Lock system but something doesn't seem correct. I have it all wired up, power to the solenoid and the switch to ground and the other side of the solenoid.
With the switch off and I turn my key I can here the Line Lock solenoid engage but the...
Hi Guys,
Maybe just me being new to the line Lock system but something doesn't seem correct. I have it all wired up, power to the solenoid and the switch to ground and the other side of the solenoid.
With the switch off and I turn my key I can here the Line Lock solenoid engage but the...
Hi Guys,
Need some suggestions on a location for a oil catch can. I purchased the UPR oil catch can but I will take your input on any brand and where you installed it. I thought I found a spot near the master cylinder but having hood clearance issues. Any suggestions would be greatly...
When removing the intake on our cars do we have to drain the antifreeze and remove the crossover tube? Does not seem so but some write ups say remove the crossover.
Thanks Guys
Before I hookup with na svt for an short runner intake I thought I would check if anyone has one they would like to sell. I have a 99 Cobra and the car is naturally aspirated. If anyone has anything please feel free to send me a pm or reply to this thread.
Thanks guys for checking in
Does anyone know what after market fuel rail will bolt and connect to the OEM equipment? Don't really have the power now but would like to change the look under the hood. Already powder coated the valve covers and picking a short runner from na svt next month that I will have painted or powder...
I have a the P1506 code and I am now checking for the problem. I was looking for a air leak with the basic home test. I sprayed brake cleaner on the vacum lines but no change in the idle. I then unplugged AIC and give it some gas the idle comes right down no problem. Any ideas would be greatly...
Hi All,
Recently I installed a set of powder coated valve covers in my Cobra. Now I am fighting an oil leak on the passenger side near the firewall. I do not believe I pinched the gasket but it is difficult see back there. Wondering if anyone else has had this issue and is it possible to only...
Hi All,
Recently I installed a set of powder coated valve covers in my 99 Cobra. Now I am fighting an oil leak on the passenger side near the firewall. I do not believe I pinched the gasket but it is difficult see back there. Wondering if anyone else has had this issue and is it possible to...