Need some Help with my SLP Line Lock install

[DHG4410]

Hi Guys,
Maybe just me being new to the line Lock system but something doesn't seem correct. I have it all wired up, power to the solenoid and the switch to ground and the other side of the solenoid.

With the switch off and I turn my key I can here the Line Lock solenoid engage but the switch is off.

Am I missing something?
Hope someone can help.

 

[Mystic03]

You have it wired to a toggle switch? If i remember you should have a ground and a power to it..you man have a wiring backwards

 

[99cobra09]

One end of the switch has to be to ground and the other end has to be to a toggled 12v source.

 

[DHG4410]

Yes I have one side of the toggle going to ground but the instruction say to send the other side to the Line Lock solenoid. The other solenoid connection I sent to power.

 

[Mystic03]

Should be a power to the solenoid...then the other to the toggle and toggle should be having one to the ground and that shpuld work for you

 

[DHG4410]

Here is anther one for you guys. I am having some leaking. How tight should these connections be? I've read elsewhere on theline where some really cranked them tight. The leaks are killing me because I want to button this up. Hope someone can jump in to help me out.
Thank You