I have been sending data logs back forth with the tuner without an issue. Now I'm at the stage to hook up my AEM wideband(by FireWire)with the tuner and comp(windows 10). I chose analog 1,2 and put the AEM values in. Once I click the green start button it loads the pids and then just spins until...
Have a steggy stage 5 eaton for sale. Comes with a Reichard racing pulley 2.75.(serial#243068) $650.
I'll pay shipping and paypal fee's.
About 7000 miles on it since I got it. In working order when I removed from car to put my whipple on. No problems with it, no play in shaft or rotors...
I have a polished accufab S.B T.B and ported and polished accufab plenum for sale $350. for both. I'll pay paypal and shipping fee's.
http://s1284.photobucket.com/user/hemified86/library/accufab
Have a 4lb metco pulley for sale. A little worn but still useable $55.
have a 6lb metco pulley. never used it just mocked it up. $80.
Have a Reichard Racing pulley for a whipple size 2.70. sold
I'll pay the shipping and paypal...
I have a steggy stage 5 ported eaton for sale(serial#243068) with a Reichard racing 2.75 pulley. Also comes with a ported accufab plenum and accufab SBTB. Put on about 7000 miles on it since I got the set-up. Not sure how much was on it before I got. There is no play in the rotors or pulley. Not...
Need help on a 03 cobra,BAP,60lb injectors,pprvdelete,upgraded fpdm. I'll start here first hopefully right forum. Hose on pprv delete had a hole in(small) but enough to lean it out. Since then changed hose(still ran lean) changed pumps and hose again thought maybe I had a kink in it. (stilll...
I have a used 2.8h polished kenne bell. It has a 4.25 pulley installed on it. Will also have a billet flow 3.4" pulley being sent with it. Putting out a feeler on it because it is still on the car. Bought it off vadorsnake04 last year at this time. I might have put 500 miles on it since I got...
Wondering if any one is running a 4lb lower and a 4in upper on a 2.8h kenne bell on 94 octane. My heads are ported and running longtubes w/ an offroad x. Just wondering if it's overkill on the stock motor???
thanks.
Traction control light on the console is on and I can not turn it off. The button clicks just like the fog lamp and the defrost button but just won't go off. Any answers.....
thanks
I have a Steig stage 5 port on my eaton and had a F!@# up on it. The corners of the torque plate ripped off about 1.5"x1.5" on both corners any one else have this problem. If I take the torque plate out what happens.
1 New Fidanza Clutch kit stage 4.3 still in box. Good for over 700lb torque.
10 spline set-up. First one with $150. gets it you pay the shipping.
Sorry guys forgot to mention this is for a 03 Cobra
1 New Fidanza Clutch kit stage 4.3 still in box. Good for over 700lb torque.
10 spline set-up. First one with $150. gets it you pay the shipping.
Sorry guys forgot to mention this is for a 03 Cobra
Have 03 Cobra rotating assembly for sale. Cobra crank, 7 pistons and 7 manley rods. also have 1 new piston and 8 new re-ring kits. Payed over $300 for the piston and re-ring kits.
Open to offers. Thanks guys!
o.k guy's need help with my set-up.
Stock block and cams, heads slightly ported.
Supercharger is ported steigmeier stage 5 with a "2.70 upper and a 4lb lower (4lb lower is a new add on)
Exhaust is long tube headers to a off-road xpipe to a flowmaster cat back. (what size???)
Intake is a jlt...