Recent content by jamiehjr

Hey! I ran an ad for the 96-98 sheetmetal intake from MMR. It was deleted due to not having a name/date on pic. Are you interested? You can call or text me at 865-659-8791. Thanks, Jamie

Hey! 1997 Ford SVT Mustang COBRA convertible - $11,500 Knoxville, Tennessee call or text 865-659-8791 4 screaming competition camshafts, bellowing long tube headers with electric exhaust cut-outs, 315 tires and 4.88 gears, on Maximum Motorsports Extreme Duty suspension. Dual Over Head Cams...

Hey! I'm in Knoxville, Tennessee and need a professional tuner for my 1997 Cobra that has been moderately modified. It was originally tuned by Scott Noe in Morristown, TN; but I've heard he is no longer in business. Willing to travel. Thanks! Jamie

Hey! I am swapping an old school engine--no computer. Can my 1997 Cobra gauges work without the computer? How do I wire the tach, oil, volt, temp gauges? Thanks! Jamie

Hey! Idle issues suck. Is there a sticky or all inclusive thread for every component that effects idle? Off the top of my head I can think of Throttle Position Sensor, Idle Air Control valve, Oxygen sensors, MAF, Positive Crankcase Ventilation valve, Exhaust Gas Recirculation valve, vacuum...

Hey! TUBE ASY-AIR BY PASS VLV INLET Part #: F6ZZ9H308BD Do I NEED this part, or can I replace with regular stock tubing from intake tube to Idle Air Control valve? Thanks! Jamie

Hey! I am interested in a supercharger for my 1997 Mustang Cobra. It is currently running forged internals with 10.4:1 compression, B heads, CompCams 106160's, and Kooks SS long tube headers with a SCT Xcal2 tune. I know I will need to rebuild the shortblock with lower compression...

Hey! I have a 1997 Cobra that has idle woes. It either hangs at 2000 rpm until settling to 850, or it dips down to 600 rpm and dies. My tuner is going to relook at it soon to see what can be done. Why does the idle suck? It is flash tuned with a SCT Xcal2. Here is the setup: 10.7:1...

test

Hey! Can the factory tach be calibrated? My tach reads 1100 RPM at idle when it is truly 800 RPM. The upper limits of RPM is even worse. Who does tach calibration, or is it time to replace with a new tach? Jamie

Hey! Never ran nitrous before, just curious about the Window Switch. I read once that the switch should be activated above 2000 RPM to prevent bearing damage. Now I am reading 3000 RPM. Would my engine be protected at 2000 RPM, or that a sure way to start the bearing knocking/tick of...

I need TORQUE and a lot of it to make up for my lack of driving skill. I have not got the hang of shifting at high RPM to get the most out of my naturally aspirated 281. Currently I upshift in daily commuter traffic with the gas floored and the tires don't even break loose. The clutch...

Hey! Scott Noe is assembling my '97 4.6 DOHC engine for me. The 106500 camshafts are hitting the flat top pistons. And the valve seals are hitting the retainers. The technicians that are advising him say the biggest cam that will fit is a 106160. JIMS SVT has been very gracious with...

Hey! I have had my '97 Cobra in the weeds for three years now and the front bumper has developed some bad road rash under the corner fog lights. I plan to replace the bumper this Spring, but was wondering if there is a solution to the road rash. I didn't know if Line-X on the bottom would...

Hey! I would like to build up my 1997 Cobra. I would like to keep the intake manifold, B-heads, and stock aluminum block for a stock appearance. Supercharging is not an option for me. The Mustang will be stock weight for a 1997 Cobra convertible with all power accessories (A/C, power...