Have a couple things collecting dust that were on my 96 cobra. Buyer will pay shipping charges. I'm not on the forums much so please email me at [email protected] to get ahold of me.
JLT true cold air intake: has some scratches $150
IMRC plates deletes(stock JB welded): $75
Intake (top/...
Ok fellows need some help here.
Car is a 96 cobra that I haven't had running for a couple of years now and I'm at the point where it could start it but not getting any signs of life.
Its been down due to valve train coming apart in the head. Well long story short I did a 03 cobra head...
Does any body know the size bolts to use to bolt up my engine to the engine stand. Ive been searching the internet to give me the dimenstions of the bellhousing bolts so I can use that info and just buy longer ones. But no luck.
I know I need about 100mm to 120mm long bolts but I need the...
Alright,
Im in the process of pulling my motor again because I had some valvetrain come apart in my head a while ago.
Well I have 03 heads and a mach 1 intake going in but Im still undecided on what cams to go with.
My question is I have a built block with Flat top pistons and no valve...
Ok here is the deal.
I have a .20 over built block with Flat top pistons.
I am putting 03 heads with a Mach 1 intake on the top end.
Cams are still undecided but I might go custom or with the Comp Cam #106500.
My goal is to run deep into the 11's N/A and get close to 400hp N/A...
Well I had oil on my sparkplug and thought nothing of it other than a plug gasket. So I pulled the valve cover off and found this laying in my head.
My cam journal is now all messed up.
How bad do you guys think the damage is? The shortblock is pretty fresh and I put about 300...
Im just cleaning out some stuff that I have accumulated that I dont need anymore. Im not looking to make a killing off any of these parts so shoot me offers on anything you see. I do have paypal so you pay there fee.
Moser 31 spline 5 lug axles: I bought these used with 9k miles on them...
This is for a buddy of mine. He is a member at nmraracing.com and his username is 351wnotch if you want to get a hold of him over there you can. He also has pictures on his forsale ad over on that website.
http://www.nmradigital.com/forums/showthread.php?t=68976
Well here it goes I have...
Im just wondering what i should gap my plugs at with my new motor. I know stock is .054 and i was running NGK Tr55 before the rebuild. The new motor has flat top pistons so compression should be around 10.5:1 so any suggestions on gap and type of plug? Car is going to stay NA until next...
Its a stock teskid shortblock from my 96 cobra. It has about 90k on it. It is still in great shape if someone just needs to get there car running again or if you want to use it for a future build. It has never seen nitrous or any kind of blower. It was pulled because i bought a forged SB so i...
Ive never posted pics of my car on here so i thought i should post some. Car is dirty though because its been sitting for two weeks.
Under the car shot