Looks like the DDM lights aren't cutting it anymore. Looking to install Morimoto LEDs, I know a few members have LEDs. Hopefully the scattering is much better controlled.
How did you guys modify the headlight retainer ring? Any flickering? Thanks!
I am looking to get new wheels (2003 cobra style 17" or 18") and bigger brakes (2000 Cobra R, Baer 6p or even 14" brakes). Just trying to figure out what will fit before buying.
So anybody running 2003 cobra 17s/18s with better brakes? If so, which brands fit without needing spacers? Many...
Looking to take my side skirts off (to repair the pinch weld damage from the previous owner) and I stumbled upon this thread. Looks like all the parts you listed are correct, judging from google image.
The 5 push pin Christmas tree fasteners along the pinch weld under the car are part...
So my front driver's side caliper creaks when pressing the pedal. Here's a video of someones mustang w/ same issue; https://www.youtube.com/watch?v=FqZn5Vj5lZw
So that guy resolved his issue by hosing down the brake calipers, so I did the same yesterday and the sound went away, but came back...
So I replaced my 1 year old 5000k DDM H10 fog lights as they started turning purple. I'm assuming they changed color so fast b/c when unlocking the car the fogs turn on and off (alarm).
New H10 bulbs came in from DDM and I installed them same day only to notice that one was a different color...
I have BFG KDW2s all around, stock rims. They hook much better than the Goodyear F1 GS D3s I had on before and the cheap Kumho's the previous owner had on it. But now the tread is low, and they are on national back order...
Thinking about getting Toyo R888s (275/40R17) after reading the...
It's time to replace the 3rd brake light, and I'm wondering which 3M tape to use on the spoiler? The old tape is coming out, is also squashed in some areas which is very common. So which tape should I use? I don't want it to be too strong as I'm sure the 3rd brake light will go again and I'll...
Friend is looking for a terminator coupe! Clean title, any amount of miles, mods are fine! NO black or yellow termis, and no verts please! We're in NYC, so seller located in eastern US preferably!
Thanks.
Hey there, just wondering if an Off-road Prochamber and American Thunder Flowmaster catback will give that classic mustang sound which I love?
I only had flowmaster catback on my car, it sounded good but quiet. Then I went with a catted MRT H-Pipe it got louder and still had that flowmaster...
So last night I noticed a bit of a whine when I started my car up, didn't think much of it... After driving on the highway, went to the city and noticed all the lights in the car started getting dim... First I thought it was my eyes, but after a bit the damn ABS light came on, radio was turning...
I just got a viper 350 2way alarm installed last week... i brought it to a shop that installs viper alarms... when i got the car back the alarm would go off every 30 minutes. a quick google showed that FORD's GEM was the cause of this. I brought it back the next day and they installed some...
so last year we noticed that whoever installed the steeda springs on my car, didn't install them properly.. they were zip tied in bottom of the car, not sitting in the groove where the spring was suppose to, but above it giving it about cm of extra height or so. after removing them and putting...
i went to ford and bought power steering fluid. they had 2, one mercon v atf and motorcraft power steering fluid - for mercon v power steering applications. i was going to get the mercon atf one but a mustang guy there convinced me to get the motorcraft psf one. i'm reading the back of it and it...