Soap's latest activity

That looks clean!!!!!

Yup. Every time I'm at the track. --Joe

No design change, all the lower intakes are the same. --Joe

What......who knows? Why.......because anyone that plugs a vacuum line with what looks like RTV and some screws is a hack and I'm going...

If this is on the car, I'm sure there are a bunch of other issues too. --Joe

You will see no gains at all from the porting if you are using pump gas and running 18#. Use ethanol and spin it to 25-30# and you will...

Sounds like you want to go faster without spending any money :censored: --Joe

You looking for a full set to use in a build? Or is this for some collector stuff etc? Good condition or damaged? --Joe

The Fel-Pro's have been a known issue for years. I've never had issues with the Ford gaskets. --Joe

Neither, it is measured where the sensor is located. Sounds like you have a 90mm housing. --Joe

Yes I ran it unported, I picked up 2 tenths with the port work and it absolutely hit hard, best 60' was 1.22. Car was never on the dyno...

That would be me, however my car is no where near 1000whp, it was just a stock engine. I recently sold my ported 2.3 though, someone...

I would bet you won't even max out a 2.3 or a 2.65, so why worry about buying a 3.1? --Joe

I mean, you're not wrong :) I appreciate your point, but there is a market for the larger injectors on the stock ECU. Even though the...

First off, the rule of 'buy once, cry once' definitely applies here. Why upgrade to 1300's when you know you will be over 90% duty...