IRS SN95 18x11" 20mm..Fitment??

It's a 295/35 but there a little stretched,had to fin tires asap yesterday so when's te time comes ill throw 315s on

Looks good!

More pics?

Will post more pics later

White95 said:

Click to expand...

Details!

^ thanks for the love on the pics lol but you qoute better pics than that here's some more guys,I whore pics of this car to much I kno,but I love this vert had it a year now and I don't see myself letting it go anytime soon!

SIC9250 said:

^ thanks for the love on the pics lol but you qoute better pics than that here's some more guys,I whore pics of this car to much I kno,but I love this vert had it a year now and I don't see myself letting it go anytime soon!

Click to expand...

Details on the wheels and suspension please

18x8.5" fronts and 18x11" rears 20mm offset front and rear,IRS swap with bilstiens all four corners and factory 03 cobra springs cut 1 coil no iso's..

Installed 5/16th spacers..pretty much flush now,no rubbing at all, believe it lol!

Nice! More pics with better lighting please!

SIC9250 said:

Installed 5/16th spacers..pretty much flush now,no rubbing at all, believe it lol!

Click to expand...

What size tire and what's the backpacking?

Blown_By_You said:

What size tire and what's the backpacking?

Click to expand...

I'd like to know this as well. I bought XXR 531's 18x11 20mm offset for the back with 315/35/18's and they stick out past the fender and I rub like crazy, only lowered a little over an inch in the back. Would like to go lower but I don't see how?! Gonna get the fenders rolled soon but Idk if that will even help.

Great looking Cobra!

Wow this thread really makes me want a IRS swap. Badass cars!

About to install an 04 IRS on my 97 PFG cobra and looking at Rovo 18x10.5 on the rears. Specs saying it's 6.7 backspacing and was wondering if it was all good to run these along with 305s if I can pull it off.

97SVTCBR said:

About to install an 04 IRS on my 97 PFG cobra and looking at Rovo 18x10.5 on the rears. Specs saying it's 6.7 backspacing and was wondering if it was all good to run these along with 305s if I can pull it off.

Click to expand...

They'll stick out.

Sent from my VS988 using Tapatalk

What’s the offset? I have 17x10.5 Forgestars on my 97 w/IRS. Tires are 285/40. They’re +31 and I had to run a small spacer to clear the bracket bolt. Have plenty of clearance to the quarter panel though.

By my calculations off of my custom wheels, you need a 7.5" backspacing with an 11" wheel on IRS in an SN95.