Yes buy new. I had an issue with sct4 I bought new not wanting to accept tune. Spent many hours with sct on phone trying to get that pos to take. They finally took it back and I put my livewire back in car. Was thinking to myself while going threw that mess. “I’m glad I didn’t buy used or I...
I've had upr in mine for probably 10 yrs without issue. The strange struts I had in the first few yrs had the "clunk" everyone talked about. Switched those out with agx adjustable and clunk went away
Im not for sure. But are these style of caps vented? I know the stock style tank and cap are vented. So possibly the system is being over pressure and it has to come out somewhere. And btw my tank that is located in battery location leaks as well
Sent from my SM-T537R4 using the...
My afs 18x9 with a 275 michelin tire fit the upr coilovers just fine. I switched to sve series 1 wheels a couple yrs back with same tire. These wheels had a different offset and caused a rub and i had to run a 1/4" spacer. If you elongate the top hole in the strut you can swing strut in for...
I had this issue as well when i switched to a different wheel design with a little different offset. I elongated the top bolt hole in the strut and this allows you to swing strut in some. Doing this will throw your alignment off so that will need adjusted.
Need more info. How much timing is in it? Spark plug gap? Put them at 25 thou and see if that helps. Log the voltage as well. Make sure voltage isn't dropping as rpm increases. Alts are garbage in these cars
Yes centerforce clutch. They are known for the wieghts on the pp fingers. Have you thought about grinding down that new rubber bushing to fit into fw adjuster? Just a sugestion
Sent from my SM-T537R4 using the svtperformance.com mobile app
I have a set of struts and shocks mid 30's on mileage. Dont have pics of backs yet. Need to dig IRS out of shed to get them. Looking for $150 for fronts and $250 for set.
New in box. Professional products typhoon intake for ford 4.6 2v. Bought this for a future gift to replace a leaky stock intake, but car has since been wrecked. $415,will get a pic up soon. contact here or
[email protected]
What MAF sensor are you guys using? Finally got it all back together. Little update on my setup. 2.9 crusher, 80's, return fuel system, has a sct ba-5000 maf in it. The problem I'm having is It will fire up fine but as rpms drop down to idle it stall. Been all over everything I've touched 3...
new aftermarket fuel hat to stock line fitting $30 SHIPPED
stock fuel line to -8 AN. $15SHIPPED
-8 AN to stock rails $15 shipped
combine them inline for a nice place to pull fuel for nitrous