Search results

bought some cheap Fuzion tires for the front and fixed my flat spot noise but the car's vibration increased. Was immediately noticable when I got up to speed going to work, about 90 to 100 its gets pretty bad, a 5. it was a 4 with the old tires. Taking in to recheck balance, but these guys...

Drove to Harbor freight (tool store) yesturday after work, my car is really been running good. Finished shopping and pushed in the clutch and had to make sure I was in the right car. The clutch pedel tension had changed and from the floor back out toward me distance (engage distance) was much...

I'm not liking the Haynes Manual 1994 thru 2004 ford mustang I bought from autozone, 23 bucks or so. this book covers 3 or 4 different cars, plus doesn't cover the IRS and just noticed either my Serp. belt is on wrong or the manual diagram is wrong. Jeez. I replaced the belt the way it was...

Why aren't the rpm's coming down How come my RPM"S are sticking at 2500-3000 when shifting all of a sudden? Looked at the throttle cable and sprayed lubed it, so don't think its that. I have slowed turned off the motor and back on to help fix it but just a bandaid. I'm pretty close to hittin...

I am so mad...where in the H double L are the two block coolant drain plugs at??? I mean OMG i bought a stupid Haynes Manual and It says 1 or two inches above oil pan line...jeez theres eighteen thousand things in that area. I saw what looked liked it could be it but I couldn't get on it too...

Hey, I've been wanting to use the SCT tuner that came with the car. its already programmed and I've never used one, but feel I could without messing anything up. I 've changed the plugs and air filter, filter just yesturday on tha CAI. do I even need to ? Car is running good. It has the Custom...

whats up with the metal female flange that accepts the fuel filter. Chilton book said to pull rubber line off filter and replace. Low and behold my lines have not rubber except looks llike and feels like rubber around the metal lines a good 2 inches from filter connection. How do i change the...

whats up with the metal female flange that accepts the fuel filter. Chilton book said to pull rubber line off filter and replace. Low and behold my lines have not rubber except looks llike and feels like rubber around the metal lines a good 2 inches from filter connection. How do i change the...

Hey I messed up and took the rear brake spring off one sile of the car while changing brake pads. I couldn't get it back on and assumed it would be alright for a while. the other side is on still. Problem is I was getting a emergency brake light and it felt like the emergency brakes were on. the...

hey, I'll probably get some good information on the search, but anyway...I have a rotation noise along with a bump feeling...the sound and bump are in sync with the tire rotation. This was evident before and after my new rotors and brake job the other day. Seems to be getting worse. Coming from...

hey, I'll probably get some good information on the search, but anyway...I have a rotation noise along with a bump feeling...the sound and bump are in sync with the tire rotation. This was evident before and after my new rotors and brake job the other day. Seems to be getting worse. Coming...

I pretty sure I'll be working under the car today replacing the x pipe to stock manifold gasket. Was under there yesturday without my PB blaster and the gasket looked weird...looked like some kind of multiple ringed gasket..I don't know what it is or what I should replace it with. The mid...

Well for those of you who have been helping with my Vibration problem, I (the Shop) finally fixed it. For those of you don't know what I'm talking about let me give short summary. I had just bought a 01 Cobra without too much "checking it out" . The Seller had told me it just had new clutch...

Changed the spark plugs today to try and fix a bad vibration/loss of power issue. One of the plugs was very oily. others seemed to have traces of oil as well. Just wanted to run this by you guys for what my next step should be...when money permits of course. Oh, it did help the vibration/loss...

what exacatly is this buttom for? when do we push the button? ANd when the light is on the trac is off???

Hi, just bought a '01 Cobra from Craigslist. The seller had a clutch put in and when he got it back he started noticing engine vibration. I noticed it immediatly when i cranked it up, the steering wheel and all where shaking. well the day before he said he took back to the clutch guy and they...