Search results

Good Morning! I am going to have a FTBR kit installed in a couple of weeks and I was told the same thing as the OP. I pulled a cast iron pumpkin out of a 94 V8 thunderbird and I had a couple of questions of where to go from here. I bought the kit with FRP Cover and I want to know if that will...

Hopping on the suspension question. These would be for my wife's 03 Cobra. Stock springs but I believe the previous owner cut half a coil. Looking at the Bilstein HDs or Koni Yellows. Price is similar. Or do I go with the above mentioned Tokico D spec? Only other mod to the car is pulley swap...

Good Morning folks, To begin, I am not sure if I am doing something incorrectly, but I tried searching and the search function isn't working for me, so I am going to ask and if you have a thread to point me to, please do so. I am going to be powder coating my wife's coil covers this weekend...

Red goes Plug side, Orange goes to the loom side

Update: I figured out what was wrong with my Cruise. When I had my new clutch installed, the installer put in a bolt to arrest forward travel on the clutch pedal. So the quadrant/arm were not resting in the cradle to push down the sensor switch. I like how my clutch is set and feels, so I did...

I am looking at picking up a WOT box and reading through the instructions, it says you use one of the green wires for the cruise control on the clutch pedal. My cruise control worked when I first bought the car, but randomly decided at some point to stop working. Will it be a problem that my CC...

Subbing for future use Sent from my iPhone using the svtperformance.com mobile app

I have a 3+ with the low pedal option and it is amazing. My wife likes driving my Cobra more than hers now because the clutch is smooth and easy.

Here is mine

I like those colors, but miss the metal flake. I didn't care for the Illusion Cherry with the silver sparkle, it looked too sparkle I though. In for PC color options too.

Hey guys, I have had a brand new Kooks high flow catted X on my car for about 3k miles. I ended up needing to swap it for some green cats to pass emissions, but when I pulled the X I found this damage on the drivers side cat. Passenger looks perfect still. What could be causing the damage, is it...

Subbing to save the video for later reference.

I have been looking at the N2MB vs. the MSD Launch Master 2 Step Rev Limiter. Is the WOT shifting the "big thing" on the N2MB? Why else would I want one over the other. I like with the MSD it's plug and play in regards to simply switching the harness.

http://www.svtperformance.com/forums/threads/03-mach-1-8-bolt-crank.758547/ This is what my research came up with. Thoughts?

Working on getting my car emissions legal. I am running Kooks long tubes with high flow cats and bassani exhaust. Tuned local. I failed first round on NOx but my CO and HC was fine. I sent pics of both printouts to my tuner and he said based on the drive trace, it looked like my Cats were not...

http://www.jegs.com/i/Weld-Racing/927/90-59350/10002/-1 Will these work on a stock IRS Cobra? Thanks

Hey guys, I was looking for drag wheels and came across these. Has anyone run them with success on the stock IRS (with grinding of course)? Specs are: Rear Size: 15x10 Offset: 21.5mm Backspacing: 6.25" Weight: 14.52lbs Thanks!

I have spent a couple of weeks now trying to do some research on rear drag wheel setups for our cars that are still IRS equipped. A lot of results are older and things have changed in the past 10+ years. I currently have 18x10s with R888's (305/35s) on them, and its fine for the street, but I...

Hey y'all So I recently had my car dyno'd and long story short, I was told I need better tires for racing etc. I don't have a dyno sheet at the moment as I pick up the car from them on Friday, but off the top of his head he said 600rwhp/500tq on their Land and Sea dyno. Currently running...

I am wanting to take my car on a cruise up Trail Ridge Road (Alt 12,183 ft.). Do I need to worry about anything taking it to that elevation? Obviously I wouldn't want to go WOT but is there anything else to be concerned about?

Dumbass question. I went to dyno day and they couldn't do a pull because they said the clutch kept slipping. The suggestion from them was firewall adjuster and clutch quadrant. I recently replaced the clutch and flywheel with a spec 3+. I reused the stock clutch cable and didn't do anything...

Hey guys, I am going to be changing my coolant overflow tank and when I was draining it, there is a sludge at the bottom and the coolant looked cloudy. Is a simple flush all I need or is there something else at foot? This is what the tank looked like after draining. Thanks for looking!

Is changing the rear shocks on our IRS more complicated than doing it on a SRA? Going to be tackling it soon so looking to be prepared. Thanks!

New parts went in over the weekend, which was very cool, but holy crap no clearance! Is it normal for long tubes to hang down this low? I measured and it's 2.5 inches from the floor to the bottom of the flange. That doesn't give a whole lot of room under an already low slung car. Looks like a...

As the title would imply, has anyone used this when putting headers on their cars? Love or hate it? https://lmr.com/item/M9432A54/96-04-Mustang-Stage-8-46l-54l-Header-Bolt-Kit Thanks!