Re-post due to my violation of "market rule #7"...
Just picked up a 2000 GT to part out. It has a Procharger P1SC with the stock pulley, Procharger Air to Air, Anderson power pipe, 90mm MAF, Diablosport Mafia, Bosch 42# injectors, KB boost-a-pump. Tuned by JLP on completely stock motor made...
Anyone have proven builds with a 4.6 and an 80mm mid frame I want to see the potential, trying to decide what direction to go with my build. I am stuck between 3 classes and 3 different set ups. All the same motor. I only have the shortblock so I can still make changes to what head, was leaning...
SHM built 4.6 based teskid block, SHM billet rods, weisco 12:1 pistons, cobra crank. Has been 9's on motor in an sn95. Motor built in 2002 by Hyland and was raced by Joe Hutchins in the NMRA from 02-05. The car was then stored until this August when I bought it. I made 5-6 passes in the car and...
SHM built 4.6 based teskid block, SHM billet rods, weisco 12:1 pistons, cobra crank, FR500 heads, HUGE N/A cams, custom 1 off intake (7,500 cost)
Motec M48 management system
Built c4 with sfi bell, trans shield, and brake.
Has been 9.96/6.27 have slips
The motor was built in 02 and...
I bought Joe Hutchins Ex-NMRA M/M car a couple months back. I love the car and don't want to sell it however I am changing it over to forced induction so don't need the top end. It consists of a one off ($7,500) intake with 8 52mm throttle bodies that drooped the car nearly a second in the...
I have searched the internet and cannot find this anywhere? What is the fastest modular powered mustang out there? I go 9.96 NA and I am working on getting someone to build me a kit I want to be the fastest nitrous mod motor out there, and I think it will be however wanted to know what I'm up...
Okay guys here's the deal. I have a verbal agreement to purchase this car. The car was all done by SHM with this one off experimental intake. The car is pretty bad on motor but due to the 12:1 comp I want to spray it instead of blower. How would I go about putting a kit on this? Also you think I...
86 Notch with 87 front
It is a stroked 351/w with Brodix track1 aluminum heads 195s
1.6 roller rockers
750 holly
Victor jr. intake
solid 613 comp. cam,
12-5-1 compression, ross pistons
coated headers
Moroso electric
water pump
Msd distributer with a 6AL msd box
Holly blue pump...
Rated to 1000hp, has trans brake:
Currently set up for 408w however can be available set up for mod motor as well. I have a SFI mod motor bell and dynamic 9.5" stall from a supercharged 2v I can swap in if you need it for a mod motor. Otherwise it has a non sfi bell for sbf and a nos...
Autometer Phantom Gauges 2 1/16
Fuel Pressure - $100
Boost - $40
Water Temp - $50
oil pressure - $30
Steering colum single gauge pos sn95 mustang black - SOLD
Gauge cluster from 98 mustang with white face gauges - SOLD
Driveshaft for C4 in an sn95 mustang - SOLD
4200 stall Dynamic TCT converter...
I'm trying to plan out what motor will be going in my 98GT that I'm currently parting out to a bare frame and body to start an X275 project. I was dead set on a BBC on 1 kit but recently be contemplating buying my dads 97 cobra and parting it out but keeping the heads, teskid block, and crank...
31 spline axles, eaton posi, welded axle tubes, 3.73 gears, girdle, extended studs. Out of 98 gt so 1/8" shorter each side. I have a lot I can throw in for the SRA cobra rear swap. I have stock UCA's you get for free, bullit springs for free and I'll throw in Steeda LCA's for $75. All you will...
This is as cheap as you will ever find a forged alum block set up. Wont take offers as this is rock bottom price just want it out of my garage asap.
04 cobra crank
00 cobra block
04 cobra oil pump
Manley H beams
Diamond Pistons
ARP head studs included
Good to 900-1000hp
$2,000...
This is my dads car babied since he bought it around 20k miles if I remember right. Its all highway, car runs solid. Has 100k on this clutch so could prob use a new one, but thats the only thing I'd say to put on the to do list with this car. Has Magnaflow magnapack catback, MAC cold air kit...
total part out, everything will go. all I want is the body and frame so let me know what you need. I listed somethings on here already from it like the built motor, procharger, trans, etc however feel free to email/text/call/pm me any request of things you need. If you need any part for a 96-04...
C4 parts for mod motor
Dynamic Mighty Mite, 1000hp rating, trans brake, hurst pistol grip, sfi bell for mod motor, trans cooler, 4500 stall.
$2,000 obo
Will seperate all above parts as well.
856-832-7419
[email protected]
alum cobra block, 03/04 cobra crank, manley h beams, diamond pistons, stage 3 port livernois 2vheads, VT cams, 9:1 comp, cobra oil pump.
$3800 <---Not negotiable, priced super cheap for quick sale not entertaining offers.
856-832-7419
[email protected]
still in car for time being can...