not for sale anymore.
Last edited:
00 Cobra R heads complete w/cams
- Thread starter redstanger
- Start date
r the heads still available?
bump
What all is required to put them on 04 cobra?
An fr500c intake I believe. That or a custom intake....
Sent from my SPH-L710 using Tapatalk 2
Sent from my SPH-L710 using Tapatalk 2
actually it would be easy to put a C intake manifold on there with minor trimming. I was thinking of doing an aviator intake manifold with CyKlone intake top hat.
FORD 4.6 DOHC COBRA AVAITOR KAR KRAFT PROTOTYPE INTAKE SVT ROUSH SALEEN | eBay
there has been some write ups. just takes some trimming. bolt holes line up and ports are damn close to same size. now the navi heads are a lot bigger than both.
headers wise all people do is oval the mounting holes just a little. I put up 4v exhaust gaskets and they looked great.
Last edited:
bump
had heads flown and heads were decked ( .010 )
these were done at a local shop.
Head 1 Head 2
lift Intake Exhaust Intake Exhaust
0.100 95 82 98 79
0.200 173 147 184 148
0.300 237 201 247 202
0.400 278 211 290 209
0.500 288 213 298 209
my SHM Book
Cobra R
lift Intake Exhaust
0.100 85 73
0.200 150 136
0.300 210 183
0.400 248 199
0.500 268 206
These are bolt on ready. These heads have springs that are designed for the high lift of the cobra r cams so they will be able to handle most aftermarket cams. They have modularheadshop.com viton seals. They have had all valve seats lap'd(absolutely no pitting or problems). The ports were cleaned up by myself and then had them flow'd. They have been surfaced as well. I will be sending brand new Ford GT intake gaskets($70 a piece) with them.
if you want to talk about them pm me and i will give you my cell phone number. my email is watsonb61@ y a h o o. com
these were done at a local shop.
Head 1 Head 2
lift Intake Exhaust Intake Exhaust
0.100 95 82 98 79
0.200 173 147 184 148
0.300 237 201 247 202
0.400 278 211 290 209
0.500 288 213 298 209
my SHM Book
Cobra R
lift Intake Exhaust
0.100 85 73
0.200 150 136
0.300 210 183
0.400 248 199
0.500 268 206
These are bolt on ready. These heads have springs that are designed for the high lift of the cobra r cams so they will be able to handle most aftermarket cams. They have modularheadshop.com viton seals. They have had all valve seats lap'd(absolutely no pitting or problems). The ports were cleaned up by myself and then had them flow'd. They have been surfaced as well. I will be sending brand new Ford GT intake gaskets($70 a piece) with them.
if you want to talk about them pm me and i will give you my cell phone number. my email is watsonb61@ y a h o o. com
Would you consider selling the cams separate?
So long as they are the same as the GT/GT500 I could use the lifters & rockers if you sell the cams to lucheski.
these are cobra R's
Intake.~.515'' lift [email protected]
Exhaust~.468''lift [email protected]
114 LSA
yes i will seperate the cams i will pm you both. I will not seperate the lifters and rockers though they go with the heads.
Intake.~.515'' lift [email protected]
Exhaust~.468''lift [email protected]
114 LSA
yes i will seperate the cams i will pm you both. I will not seperate the lifters and rockers though they go with the heads.
How much for cams only?
$450ship'd
cams are sold.
heads are still around.
new price on the heads are $1800
heads are still around.
new price on the heads are $1800
Last edited:
bump..
bump heads are still around $1500 plus shipping. bolt on ready
Users who are viewing this thread
