selling some 03/04 cobra Brand new complete Ford GT heads $1500 for both complete with cams
heres the part #
M-6099-GT
M-6049-GT
heres the part #
M-6099-GT
M-6049-GT
03/04 cobra Heads
- Thread starter sleepersaleen
- Start date
Man these would be awesome on my wifes 01' Cobra.
Last edited:
Bump for awesome flowing Cobra heads with 2mm larger exhaust valves (37mm / 32mm). 
They are suppose to flow 20% intake and 15% exhaust over production heads.
They are suppose to flow 20% intake and 15% exhaust over production heads.
Last edited:
03-04 Cobra heads are not FGT heads.
I assume these are FGT heads?
I assume these are FGT heads?
According to what I found on FRPP's site this part number replaced the FGT heads. :shrug:
FRPP says this is the final revision of 00R heads.
FGT heads were $900 each bare back when they had their own part number, notice I modified my posts because I am not too sure right now.
I was all like :rockon: but then I was :nono:
lol
I am going to call up on Monday and see what they say happened with the whole PN change.
FGT heads are discontinued (very recent),
but loaded w/cams and valvetrain were selling for 880 each.
Part numbers were M-6049-GT and M-6099-GT
Bare Shelby heads are available now though.
1500 is a good deal for those heads!
RH is gone from FRPP,
LH are still available while they last.
1500 is a killer deal!
but loaded w/cams and valvetrain were selling for 880 each.
Part numbers were M-6049-GT and M-6099-GT
Bare Shelby heads are available now though.
1500 is a good deal for those heads!
RH is gone from FRPP,
LH are still available while they last.
1500 is a killer deal!
Last edited:
bump
You would have to run a Boss290 Aussie intake and GM TB to make these work on a 4.6L
The Sulli intake would work, just give em a call.
The Sulli intake would work, just give em a call.
do you still have heads?
So do these work on a 4.6 or what? and I would be running a 3.4 crusher so let me know asap
You have to modify the 03 Cobra lower ports to match the head ports and you have to change the header flange because the FGT/GT-500s have different bolt patterns. That is if they are FGT heads. It will say right on the casting if they are.
ya im just very confused bc it says 03/04 cobra heads then its FGT heads so im lost lol
Fbrenske
New Member
will these fit a 03 mercury marauder same engine but don't know about space
Users who are viewing this thread
