***Car Is Sold Pending Sale This Sunday***
2003 Black Vert. w/ parchment inserts. have an extra set of front seat covers that will come with the car. Also have the toneau cover.
75,352 miles . motor was built at 68,784 miles so i have a little over 6K on the build.
Romeo Block honed and deck
Kellogg Crank
Eagle H-Beam Rods with ARP 2000 Rod Bolts
Diamond Forged Pistons with Steel H-13 Pins - 9:1 compression
Total Seal AP Stainless Rings
ARP Side Bolts
ARP Main Studs
Clevite H-Series Bearings
Bought new updated 9 thread heads from Ford.
L&M HP oil pump with billet gears.
ARH Racing long tubes w/ borla stingers
everything on the engine was powder coated black when i had it out w/ ford blue valve covers. Has FORE coil pack covers that are brushed black and say - 32V TERMINATOR. Heat blanket is not on the hood and inside of hood has been painted.
Trans:
Pro-Motion 750HP clutch
26 spline
Fidanza Light weight Fly wheel
MGW shifter.
Stock IRS, IRS brace and bushings w/ H&R race springs in the rear - noticed the pumpkin started to leak last time i changed the oil - but if i keep i'll be doing a full tilt kit so i am not worried about it.
Maximum Motorsports:
Caster Camber plates
K-Member
A-arms and coils up front ---complete kit up front w/oil filter relocation kit
Fuel: All new and updated FORE stuff
Dual Hat w/ AEM 50/1200 pumps
8 Feed - 6 return
inline filter
pump controller w/FPDM
FORE rails
ID1000 injectors
Car is tuned for E85 only - made 697whp / 647tq - 3.0 upper and 4lbs lower spinning at 21.5lbs of boost
other upgraded items are:
True Forged wrinkle black tanks
True Forged black chrome hood vents and side scoops
AFCO heat exchanger
JLT oil seperator and pre-filter
Kenwood Dual din w/navigation
SOS A-pillar and steering column pod, speed hut gauges oil, fuel, and boost.
17X9 up front 17X10.5 rear chrome. R888 in the back maybe 3000 on them in great shape, fronts need to be replaced.
wanting to get 20,000 Firm, or i'll just keep it. Tons of Pics on the Craigslist Add Link...
2003 Black Vert. w/ parchment inserts. have an extra set of front seat covers that will come with the car. Also have the toneau cover.
75,352 miles . motor was built at 68,784 miles so i have a little over 6K on the build.
Romeo Block honed and deck
Kellogg Crank
Eagle H-Beam Rods with ARP 2000 Rod Bolts
Diamond Forged Pistons with Steel H-13 Pins - 9:1 compression
Total Seal AP Stainless Rings
ARP Side Bolts
ARP Main Studs
Clevite H-Series Bearings
Bought new updated 9 thread heads from Ford.
L&M HP oil pump with billet gears.
ARH Racing long tubes w/ borla stingers
everything on the engine was powder coated black when i had it out w/ ford blue valve covers. Has FORE coil pack covers that are brushed black and say - 32V TERMINATOR. Heat blanket is not on the hood and inside of hood has been painted.
Trans:
Pro-Motion 750HP clutch
26 spline
Fidanza Light weight Fly wheel
MGW shifter.
Stock IRS, IRS brace and bushings w/ H&R race springs in the rear - noticed the pumpkin started to leak last time i changed the oil - but if i keep i'll be doing a full tilt kit so i am not worried about it.
Maximum Motorsports:
Caster Camber plates
K-Member
A-arms and coils up front ---complete kit up front w/oil filter relocation kit
Fuel: All new and updated FORE stuff
Dual Hat w/ AEM 50/1200 pumps
8 Feed - 6 return
inline filter
pump controller w/FPDM
FORE rails
ID1000 injectors
Car is tuned for E85 only - made 697whp / 647tq - 3.0 upper and 4lbs lower spinning at 21.5lbs of boost
other upgraded items are:
True Forged wrinkle black tanks
True Forged black chrome hood vents and side scoops
AFCO heat exchanger
JLT oil seperator and pre-filter
Kenwood Dual din w/navigation
SOS A-pillar and steering column pod, speed hut gauges oil, fuel, and boost.
17X9 up front 17X10.5 rear chrome. R888 in the back maybe 3000 on them in great shape, fronts need to be replaced.
wanting to get 20,000 Firm, or i'll just keep it. Tons of Pics on the Craigslist Add Link...
Last edited:
