03 BLK 2.8l LC Kenne Bell

luciddreamer

Member
Established Member
Joined
Sep 28, 2010
Messages
33
Location
Slidell, LA
Hello all,

Up for sale is my 2003 KB cobra with 55,xxx miles. I purchased this car off SVPT in April 2016 with 44k on her. I BaBy her and only use it for cruising when the weather permits.

Clean title, in hand.

The cobra has a 650hp/580lbft to the wheels on 91 octane. The tune is very modest and streetable. The paint is in great shape, I used to own a detail shops and enjoy polishing and protecting black, with dodo and menzerna products. No swirl marks.
I have a folder with almost ever receipt and original build sheet.
Garage kept, smoke free, rust free car
Asking $27,995. Thanks for looking.

Car is located in Slidell, LA

Contact me via text 504-644-7848 or pm.

**previous owner installed wet nitrous system the original bottle has never been refilled, that's how little nitrous has been used

Engine Mods:
2.8LC kenne bell w 3.75" 22psi @ sea level
Accufab single blade throttle body
25,50,75 and 100wet shot nitrous (depending on what nozzles you have installed)
K&N high flow filter (new)
Morose supercharger coolant tank
Kincaid gen2 killer chiller
Custom cobra engineering head coolant mod
Reische performance 170degree thermostat
Metco 100/90mm idlers.
Metco auxiliary idler kit 100mm
Metco interchangeable crank pulley with 4+ lb (8.60") lower
Recently..
mechman SS alternator
Gates HD green back 8rib
New Italian explorer grade HKS bearings in all pulleys, which are dual bearing
Innovators west harmonic Dampener
Frankentensioner

Exhaust:
2 magnaflow highflow cats (car passes emissions
Mac Pro chamber
Borla Stingers

Fuel:
Twin Walbro gss34/ fuel pumps
Division X dual pump return style fuel hat
Division x two port fuel pressure regulator (base pressure set at 35psi)
Division x hat to stock line, rail, and FRPS adaptor
0-100 psi liquid filled mechanical fuel pressure gauge
Lethal performance dual pump return style wiring harness
Injector dynamics 850cc injectors

Trans:
26 spline input shaft
Lethal Billet TOB sleeve
New ford perf TOB
McLeod RXT Twin disc clutch
Spec 3+ flywheel with interchangeable surfaces
Steece clutch quadrant
Stress firewall adjuster and cable
B&m short throw

I have brand new IRS half shafts from G FORCE that come with that car and are brand new still in the box. Strongest you can buy for this vehicle.

Suspension:
Maximum Motorsports adj caster/camber plates
Maximum Motorsports welded subframe connectors
H&R Race springs (red)
Poly bushings
UPR IRS cover anti hop brace
Baer eradispeed 2 piece drilled and slotted rotors (1/4 spaced)


Wheel/Tire setup:
18x9 and 18x10.5 AFS chrome replicas
(No curb rash)
Front-bf goodrich g force sport pro comp 2 (275/35)
Rear-Toyo Proxes R888 (315/30)

Misc:
Pioneer avic-5400 double din w/custom painted surround
New interstate battery
Viper alarm system-needs new fob
DDM tuning 8k main and fog
LED interior lights
LED reverse lights
Rolled fenders
Shorty antenna
American muscle chrome gauge bezel
15% window tint
Cobra mats
Throttle pedal recall
Hard wired radar detector
Speed hut water temp gauge
Speed hit Svt boost gauge
Innovate motor sports wide and air fuel ratio gauge linked to data log
Speed of sound center armrest nitrous control switch panel (arm,purge,heater)
10lb nitrous bottle with bracket heater
NOSmini progressive window switch
N2MB 2step with launch control/wot shift
Hidden shift light in a/c vent
Custom shift ball
IMG_0681.JPG

53227961573__917C2233-FD35-450D-8844-1FDE8F529C91.JPG

53230005123__8C6AD5CE-A396-4DA7-99D8-A9EDB82566C3.JPG 53228076180__75D03D4C-00A3-4A9D-9C54-5A0F2D0F2067.JPG
53227969105__E8DD27A7-FE1E-4773-98F8-2D0DA98B3CC7.JPG
 
Last edited:

luciddreamer

Member
Established Member
Joined
Sep 28, 2010
Messages
33
Location
Slidell, LA
If u decide to sell those half shafts separate let me kno i live in mandeville

If it comes to that, Sure will broski.... much love for another north shore cobra owner!!

Kind of wanted to sell the car "complete" staying true to form on the build w the supercharger and IRS
 

Users who are viewing this thread



Top