4v heads, cobra brakes, COPS, t-stat housing,fuel rail, alum. d/s, o/r x
ok, i was originally planning on doing a 4v swap but have decided to stay 2v instead.
here is what i have for sale:
1) COMPLETE 03 Cobra heads, including: fully assembled with stock valvetrain and stock cams, valve covers, COP covers, all 8 COPs, and stock exhaust manifolds. drivers side head already has provisions for the cooling mod. taken off with about 50k miles on the car
***the #7 combustion chamber has nicks in it due to a shattered piston. valves have been checked, NO DAMAGE TO VALVES and no leakage***
***these are the early design of the heads (valve covers have 11/02 date stamped on them), NOT the redesign with the updated spark plug threads***
im looking to get $650 + shipping for the heads. i will upload pictures of them shortly, and more will be available upon request.
Pics:
and the #7 cylinder:
2) 1998 stock cobra intake and exhaust cams.
****SOLD!!!****
3) an extra set of 4v COPs. 74k miles on them. $70 + shipping OBO.
(forgot to take pictures of these....will do ASAP)
4) 4v thermostat housing. used, but in good condition. dont know what this is worth, so ill say $50 + shipping. make me an offer tho.
Pics:
5) 01 cobra fuel rail, 74k miles. likewise, dont know what its worth, ill put it at $50 + shipping OBO, make me an offer as well.
Pics:
6) liberty 26 spline input shaft for a t56.
****SOLD****
7) MGW t5/t45 short shifter.
****SOLD****
8) 04 cobra front brakes. will come with all hardware, including brake lines. will also come with duralast C-Max Ceramic brake pads (less than 500 miles on the pads) and new Duralast rotors. $350 FIRM + shipping on these.
Pics:
This is a picture of the hardware kit, the old one. i have a new kit (NIB) that includes new caliper bolts and their e-clips:
9) also have a BBK o/r X-pipe that im posting up for my friend. came off his 2002 GT, but i believe it should work for the 4v as well. he is asking $150 + Shipping for it.
Pic:
10) also have decided to offer up my aluminum driveshaft for sale too. you will need to re-use your pinion flange and rear ujoint off your current one tho, as this one has a different ujoint to fit the IRS. its a FRPP part, it has the output flange (the part that goes into the transmission) to fit a t-45 manual transmission. it will also fit the tr-3650 this way. if you want it for an automatic, it will fit, but you will need to reuse your output flange.
for the driveshaft, id like $100 + shipping for it. here are the pics:
I will get pictures of all this soon, just need to head on out to the garage to take pictures of it all. make me an offer on this stuff guys, i need it gone ASAP so i can start my 2v build.
PM me here or email me at [email protected] if you have any questions.
Thanks for looking
ok, i was originally planning on doing a 4v swap but have decided to stay 2v instead.
here is what i have for sale:
1) COMPLETE 03 Cobra heads, including: fully assembled with stock valvetrain and stock cams, valve covers, COP covers, all 8 COPs, and stock exhaust manifolds. drivers side head already has provisions for the cooling mod. taken off with about 50k miles on the car
***the #7 combustion chamber has nicks in it due to a shattered piston. valves have been checked, NO DAMAGE TO VALVES and no leakage***
***these are the early design of the heads (valve covers have 11/02 date stamped on them), NOT the redesign with the updated spark plug threads***
im looking to get $650 + shipping for the heads. i will upload pictures of them shortly, and more will be available upon request.
Pics:
and the #7 cylinder:
2) 1998 stock cobra intake and exhaust cams.
****SOLD!!!****
3) an extra set of 4v COPs. 74k miles on them. $70 + shipping OBO.
(forgot to take pictures of these....will do ASAP)
4) 4v thermostat housing. used, but in good condition. dont know what this is worth, so ill say $50 + shipping. make me an offer tho.
Pics:
5) 01 cobra fuel rail, 74k miles. likewise, dont know what its worth, ill put it at $50 + shipping OBO, make me an offer as well.
Pics:
6) liberty 26 spline input shaft for a t56.
****SOLD****
7) MGW t5/t45 short shifter.
****SOLD****
8) 04 cobra front brakes. will come with all hardware, including brake lines. will also come with duralast C-Max Ceramic brake pads (less than 500 miles on the pads) and new Duralast rotors. $350 FIRM + shipping on these.
Pics:
This is a picture of the hardware kit, the old one. i have a new kit (NIB) that includes new caliper bolts and their e-clips:
9) also have a BBK o/r X-pipe that im posting up for my friend. came off his 2002 GT, but i believe it should work for the 4v as well. he is asking $150 + Shipping for it.
Pic:
10) also have decided to offer up my aluminum driveshaft for sale too. you will need to re-use your pinion flange and rear ujoint off your current one tho, as this one has a different ujoint to fit the IRS. its a FRPP part, it has the output flange (the part that goes into the transmission) to fit a t-45 manual transmission. it will also fit the tr-3650 this way. if you want it for an automatic, it will fit, but you will need to reuse your output flange.
for the driveshaft, id like $100 + shipping for it. here are the pics:
I will get pictures of all this soon, just need to head on out to the garage to take pictures of it all. make me an offer on this stuff guys, i need it gone ASAP so i can start my 2v build.
PM me here or email me at [email protected] if you have any questions.
Thanks for looking
Last edited:
