Quoted to see if the pictures appear.03' Silver TURBO 45k miles, under $25k!
45,XXX Miles on this car and only 25XXX on engine. I am selling due to a baby that we recently had eating up all my money and free time. I am open to all reasonable offers. LOCATED IN HOWARD COUNTY MARYLAND (NEAR BALTIMORE)
COBRA!!!! March 2008 feature car in Modified Mustangs Amazing 2003 Cobra Mustang this car is very fast and very nice. It is done right and no cornes cut in any way. This car will impress you in every way come by and take a look. It is turbocharged with a hellion turbo kit with all upgrades associated with it. Rear end is also fully built and is still indepentant rear but all upgrades have been performed.Every part of this car is built with top notch parts and peices and maintained in a perfect way this is my baby but must sell due to marriage and chrildren. It is garaged and lives a quiet life and i barley ever floor car even has new tires on it just cause i want to keep it in perfect shape the cars engine and trans was replaces and rebuilt recently with the finest parts avail. Give me a call and stop by to take a look thanks and i hope to hear from you soon. Call for complete list of mods. I am also getting fairly good gas milage due to the turbocharger on the car with 20mpg+ and drives smooth and straight. New clutch put in with the trans and all the bolts on car have been torqued down and oil is changed every 2000 miles and i use 10w40 royal purple. Asking 24,500 NO TIRE KICKERS PLEASE!!! This is a fair price for a car with a LOT done please dont message me if you want to lowball offer me.
Intake:
Hellion T76 S-Trim Ceramic Ball Bearing Turbocharger with .96 a/r turbine
SCT 2800 BIG AIR MAF
Powdercoated Stock Throttle Body
MACH1 intake
Turbosmart Eboost2 Boost controller
Turbonetics Evolution wastegate
TurboXS BOV
Hellion Bar and plate intercooler
Exhaust:
Hellion 3" Stainless Downpipe
Hellion Stainless "Y" connector
SLP LM1 catback
Motor:
Motor built by HP performance in jacksonville fl
Keith Black pistons .030 over 8.5 to 1
Oliver Billet Rods
Valve job by ModularPerformance.com
Heads are bowl ported by ModularPerformance.com
Crower Stage3 cams #62824-4
Crower heavy Duty valve springs/retainers #84710
Canton Road Race 7qt Oil Pan #15-784
NGK-TR6 gapped @ "0.030
Energy Suspension polyurethane Motor Mounts
Fuel:
PHP return fuel system
Dual Weldon 310lph in-tank pumps
-8AN fuel line with Apten stainless adapter
Russell 40micron -8AN fuel filter
Weldon Fuel Pressure Regulator
Pauls Hi Performance MACH1 Fuel rails
60lb SD injectors w adapters.
-6AN Return line
Transmission:
T56 from RPM trannys with all cryogenic gears
Centerforce DFX Clutch
Centerforce Aluminum Flywheel
Centerforce TOB
Fiore F/W ADJ and quadrant
MGW T56 Shifter w/ red handle
Dynotech Engineering MMC Custom Driveshaft
Front Suspension:
UPR K Member
UPR A Arms
UPR Bumpsteer kit
Maximum Motorsports Coilovers 350#
Maximum Motorsports CC Plates
Rear Suspension:
DSS Level 5 Halfshafts w/larger outer hubs
Maximum Motorsports UCA/LCA/FRT&RR Diff Bushings
Maximum Motorsports IRS Subframe bushings #MMIRSU-1
14mm Front IRS bolts and nuts from MM
Stock Bilstein Shocks w/ MM bushings
Stock Height OEM Coupe springs
UMI Performance Torque Box reinforcements (fronts)
ABS wire pass-thru relocate
PHP Billet Toe Link Bars
Billetflow Rear Diff Cover Brace
31 spline Eaton posi differential
FRPP 3.55
Motorcraft Synthetic 75w140 Ford Friction modifier
Miscellaneous:
Autometer Fuel Pressure Gauge
Autometer Lunar Oil Pressure Gauge
Autometer Lunar Boost/Vac Gauge
Maximum Motorsports MMRB-9 6-pt cage w/swingouts
AFS 9" polished front wheels
AFS 10.5" polished rear wheels
SLP Line Lock
Stainless brake speedbleeders SB1010S-SS
Ford HD Brake Fluid 550degree
Metco Driveshaft Loop
Gorilla 1" open end Lugnuts #90087
Motorcraft Locking Gas Cap FC958 XU5Z-9030-DA
Battery Relocated to trunk
HANS Force Subframes
Custom Power Steering Reservoir Bracket
Pictures aren't loading for me. Seen this car posted before though. Don't know how you haven't sold it yet. That is a lot of car for the money.