03 Wheel from Gene Evans Ford Racing - Part Numbers

Black Cobra

New Member
Established Member
Joined
Mar 12, 2002
Messages
387
Location
Alabama
I scuffed up my driverside rear wheel coming down a tight lefthand corkscrew downramp at the parking garage at work back on 8/27. I got distracted and took my eyes off the ramp. I odered a replacement from http://www.gefracing.com/index.htm. The wheel arrived this afternoon via FedX ground in perfect shape. I'm satisfied.

Had to order a tire too from tirerack. I think the tire got more damage than the wheel. the sidewall must be very soft or something. The curbing that has a 90 degree edge on it "not rounded" tore several patches of rubber out of the sidewall, it's a wonder it didn't go flat. The tire is actually a WR-17 even though it says ZR-17 on the sidewall, it's rated for 168mph. Been driving the '98 since then. Well gotta go get this tire mounted, the wheel looks like a Ford part to me. Here are some numbers on the wheel.

Part numbers:

GEF partnumbers
FMC F8ZZ1130AA ORNAMEN "SVT center cap"
FMC 2R3Z1007AA WHEEL A

Stamped Numbers inside Wheel:
Each spoke has something stamped on it
starting at the valve stem hole and going clockwise...
#1 C# [041202 1] A
#2 2R3V - 1007 -
AB - Painted
BA - Chrome
#3 HT [B5313] S1
#4 X [234362]
#5 17X9.OJX26MM
"Ford Oval Logo"

The [] brackets above appear as a rectangular box stamped on the actual wheel.

The box that the wheel came in had two stickers on it:

#1
Ford Motor Company
ONE
2R3Z - 1007 - AA
Aluminum Wheel
S862A 10/01/01

#2 shipping label from
San Francisco PDC
700 National Court
Richmond, Ca 9480

"Ford Oval Logo"
SPO 02137039 - Part
FCS 7084 S&D MAR. '02
 

Users who are viewing this thread



Top