• Welcome to SVTPerformance!

03cobra Single turbo build

Discussion in 'Pics and Videos Buffet' started by Mystic03, Sep 19, 2014.

  1. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    mods please delete if need be

    figure i would post my build since not many on here on the board especially with most of the fitment issues..with my build it is a built 99cobra teskid bored 302 thanks to dadro77 for selling me the awesome motor!! and to tim at MPR for building a great motor! here are the specs...

    Ported and polished stock heads
    Ss comp cam springs and retainers
    Angle job on valves
    Rev custom valves
    HP performance cams (s292)
    MPR built motor
    Lunetti stroker crank
    Duel 65 mm throttle body
    CP piston
    Mod max forged hbeam rods
    All ARP hardware
    Melling oil pump billit gear

    at MPR

    IMG_32391586500062_zps528e31a0.jpg


    20140617_110550_zpsee7e23b1.jpg

    massive valves!
    (i did notice the debirs on the valves which has been cleaned it was just dust from sitting so long)

    20140729_142845_zpsc6d35819.jpg

    20140729_142755_zps43fe5b97.jpg

    on its way to be shipped to my house!!

    20140708_095412_zpsddf60193.jpg


    received motor...

    20140728_161439_zps42917e35.jpg

    time to retire the 700hp 95k motor served me well over the past 5 years since day 1!
    20140801_200518_zpsa226a292.jpg

    in its new home!
    10592194_764824830207284_1153466897_n_zpsd3c3bf48.jpg

    ran into my first issue..the cam sensor are different from 03's to original 99's..so shot down to local autozone and picked up the revised cam sensor...fit perfectly!

    (stock on the left) (stock 99 on the right)
    20140808_121700_zps734dbeda.jpg

    so gt that taken care of..on to the hot side!

    not sure of the brand but looks like the mmr hot side passenger fit like a glove! (not the best pics but you get the idea)

    20140815_133854_zps67982a3a.jpg

    20140815_133915_zps207f3b3a.jpg

    and now on to the driver side...well the P/S lines were in the way so had the help of TwoTone5oh come by and bend the p/s lines enough to bolt the driver side up which i plan to header wrap and also thermal wrap everything near the hot side

    20140829_172017_zps60ce49db.jpg


    10656460_777223105634123_2051942910_n_zpse1bb4204.jpg

    so far so good!

    now i needed to tap the iat2 sensor in the manifold..again twotone5oh to the rescue!

    temp_zps191c82d7.jpg

    20140918_230912_zps03930cca.jpg

    starting to come together nicely!

    20140918_230901_zps7da5df33.jpg

    now just need to fab up the cold side.. a bit more..since i want to retain the stock locations of pretty much everything i decided to start with the hellion intercooler/cold side
    20140724_180425_zps0ef394fc.jpg

    20140724_180456_zps24550389.jpg

    and thats it so far...just awaiting my PTE 7675 BB .96 ar turbo..wastegate and bov..and 3" piping to start the full cold side and it should be ready to fire up! planning on 800rwhp mild-low boost..and upmost of 1k if the itch should get to me
     
  2. srt10ram

    srt10ram The Little 2v That Could Established Member

    Messages:
    649
    Joined:
    Feb 13, 2011
    Location:
    Nola
    Nice build, I run the hp292s in my Bullitt. If they're anything like the 2v grind they will be extremely lopey and want to be rev'd.
     
  3. elrafacobra

    elrafacobra New Member Established Member

    Messages:
    22
    Joined:
    Dec 17, 2010
    Location:
    avondale, pa
    Looking good!!
     
  4. Mentos

    Mentos Earn this Established Member

    Messages:
    1,424
    Joined:
    Dec 22, 2004
    Location:
    Columbia, SC
    Nice! Looking forward to some more pics and vids.
     
  5. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    Should be a stout build..everything is actually going togather very smoothly the exhaust will be dumped out the bumper so I hope those cams are not too lopey
     
  6. dadro77

    dadro77 Deez nuts.... Established Member

    Messages:
    831
    Joined:
    Jul 16, 2006
    Location:
    south fla
    Looking good!! I can't wait to hear it!!
     
  7. TakeAwayTheFear

    TakeAwayTheFear Stabbing the Drama Established Member

    Messages:
    3,058
    Joined:
    May 7, 2005
    Location:
    Missouri
    bam single turbo ftw!!!!!
     
  8. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    Its getting sooo close I just got my wg and bov in turbo should be here next week!
     
  9. MGC

    MGC Driven To Perfection Established Member

    Messages:
    2,142
    Joined:
    Aug 13, 2009
    Location:
    Traverse City, MI
    Looking good! That'll be siiiick!
     
  10. dadro77

    dadro77 Deez nuts.... Established Member

    Messages:
    831
    Joined:
    Jul 16, 2006
    Location:
    south fla
    Good deal. Subbed!!
     
  11. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    just a little update got all my cold side piping 3" in.. new to market qrj 50mm bov and the massive v60 wastegate

    20141001_161512_zps70ddb71e.jpg

    20141001_161354_zps1e058383.jpg

    20141001_161345_zps6aa0702f.jpg
     
  12. dadro77

    dadro77 Deez nuts.... Established Member

    Messages:
    831
    Joined:
    Jul 16, 2006
    Location:
    south fla
    That wastewater looks a lot like the Synapse I had
     
  13. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    finally got the PTE7675 .96 dual BB turbo in!

    20141007_160353_zpsde3e2cca.jpg

    prob best parts shelf ive had in a long time...KB 2.2 and this 7675 turbo
    20141007_160551_zps7b5109b2.jpg
     
  14. TClark22

    TClark22 Well-Known Member Established Member

    Messages:
    5,627
    Joined:
    Nov 2, 2006
    Location:
    Kansas
    sick build! Plan to make around 1k?
     
  15. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    thank you! and yes that's the plan to try and hit that number later on but right now i just wana set it at 18lbs and enjoy it for a while untill the urge for more power bites..i plan to run 24+when the bug bites lol
     
  16. MTBSully

    MTBSully Well-Known Member Established Member

    Messages:
    4,142
    Joined:
    Sep 7, 2009
    Location:
    Portsmouth, NH
    Is that a billet wheel turbo? Thinking of upgrading to that turbo this winter and I was told billet wheel AND ball bearing is overkill.
     
  17. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    yes it is a billet wheel dual BB. overkill but will spool very quickly and achieve the numbers i am shooting for with a breeze!
     
    Last edited: Oct 7, 2014
  18. Bloody-mustang

    Bloody-mustang New Member Established Member

    Messages:
    13
    Joined:
    Nov 18, 2011
    Location:
    Tucson,az
    Sweet another turbo car in town looks good
     
  19. Mystic03

    Mystic03 Active Member Established Member

    Messages:
    6,626
    Joined:
    Apr 21, 2005
    Location:
    tucson,az
    Thanks buddie figured it was time for change since ive been rockin the kb for years
     
  20. Camaro_94

    Camaro_94 Brown Recluse Slayer Established Member

    Messages:
    9,623
    Joined:
    Feb 14, 2008
    Location:
    Hunting spiders
    Very nice!!!
     

Share This Page