04 black coupe cobra built motor, built tranny, full fuel system, kb 2.8lc etc...

04blckkbcobra

Member
Established Member
Joined
Nov 13, 2010
Messages
120
Location
destin florida
2004 COBRA BLACK WITH GREY SUEDE INTERIOR CHROME WHEELS COUPE CAR. CAR HAS A NEW BUILT MOTOR, BUILT TRANSMISSION, NEW KB 2.8LC. WITH FULL RETURN STYLE FUEL SYSTEM
THE CAR HAS 22K MILES AND 800 MILES THE NEW MOTOR,SUPERCHARGER,FUEL SYSTEM, CLUTCH ETC..

LIST OF MODS
-BUILT MOTOR BY PANHANDLE PERFORMANCE CAN HANDLE 1000+HP
- Manley 2618 forged pistons ceramic coated tops and skirts
- Manley h beam forged factory cobra rods, Arp 2000 hardware
- kellog crank shaft
- motor was bored just 10 over so piston is custom to motor
- highest quality top seal rings, very expensive
- stage 1 cylinder heads, polished ports, bronze valve guides
- custom valve job
- Adjustable cam gears with brand new complete timing chain set
allows for cams to be set to perfect degree on each head.

-BUILT G-FORCE TRANSMISSION
-26 spline input shaft
- 9310 alloy material for the gears and alloy synchronizer sleeves
- Gears 2nd, 3rd, and 4th all have replaceable synchronizer sleeves.
- added gear width
- slightly noisier than a stock T-56
- helical gearing to maintain a comfortable noise level while still maintaining exceptional strength
- BUILT TO HANDLE 1200HP AND 1000FT-LB OR TORQUE

- KENNE BELL 2.8 LIQUID COOLED SUPER CHARGER, KB THROTTLE BODY
- Kb dual 75 mm polished monster throttle body
- 3 different pullies for different boost levels with pulley remover tool
- high quality supercharger, read the specs on the Kenne Bell website

- MPH BEHEMOTH INLET WITH CUSTOM POLISHED JOB
- much larger and tons more flow than factory kb inlet
- these are $1450 not polished from kuragen motor sports

- LEATHAL PERFORMANCE FULL RETURN STYLE FUEL SYSTEM
- DivisionX Dual Pump Return Style Billet Fuel Hat
- Aeromotive Pro-Series EFI Fuel Pressure Regulator and fuel pressure guage
- DivisionX High Flow Fuel Rails
-(2) DivisionX 340lph Stryker Pumps
- 8an Fragola Series 8000 Push-Lite Race Hose
-Custom Dual Pump Return Style Wiring Harness w/Relays
-DivisionX 10 Micron Fuel Filter All Necessary Fittings, Hose Clams and Accessories

- INTERIOR MODS AND UPGRADES
-pioneer 7" touch screen navigation
-Aeroforce Interceptor gauge
-Autometer NV boost gauge
-Autometer Ultra-Lite Series Digital Wideband Air/Fuel Ratio Kit

-BLUE BILLET FLOW PULLIES
-CANDY BLUE POWDER COATED VALVE COVERS AND COIL PACK COVERS
-CANDY BLUE POWDER COATED PULLEY BRACKET
-PRO 5.0 BILLET SHIFTER
-SPEC STAGE 3+ CLUTCH WITH LIGHT PEDAL FEEL UPGRADE
-CLUTCH QUADRANT CABLE ADJUSTER
-BILLET FLOW COBRA IRS BRACE
- MAXIMUM MOTORSPORT IRS BUSHING KIT
-BBK SUB-FRAME CONNECTORS
-AFCO DUAL CORE HEAT EXCHANGER
-BLACK MAGIC FAN WITH CUSTOM SHROUD
- MOROSO RADIATOR EXPANSION TANK POLISHED ALUMINUM
-CANTON POLISHED ALUMINUM HEAT EXCHANGER TANK
-MAC LONGTUBE HEADER WITH PROCHAMBER X MID PIPE
-CANTON 7 QUART ROADRACING OIL PAN
-MAGNAFLOW POLISHED STAINLESS STEAL EXHAUST
-5% BLACK WINDOW TINT, BLACKED OUT TAIL LIGHTS
-CHROME COBRA INSERTS ON REAR BUMPER
-10.5 INCH REAR COBRA WHEELS WITH NITTO NT555R 315/35 DRAG RADIAL TIRES
- NEW NITTO NT 555R FRONT TIRES

I AM TIRED OF TYPING AND PROBABLY FORGOT A FEW THINGS BUT THE CAR IS PERFECT IN EVERY WAY IT NEEDS NOTHING AND IS READY TO RUN ON ALL LEVEL. WEATHER YOU WANT RUN RACE GAS AND FULL BOOST OR CONSERVATIVE STREET TUNE. THE CAR WAS JUST RE TUNED CONSERVATIVELY MADE 647 RWHP ON THE 3.5 PULLEY
20 LBS PEAK BOOST.

EMAIL FOR QUESTIONS OR CALL (8500 200 6619)
I AM ASKING $31,OOO
I KNOW THAT'S A LOT OF MONEY BUT I JUST SPENT 20,000 ON THE CAR IN THE LAST 6 MONTHS WITH RECEIPTS. I'M LOSING A TON OF MONEY SELLING IT AT THAT PRICE! YOU GET WHAT YOU PAY FOR AND THIS CAR HAS IT ALL!!

PICS

http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0698-1.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0695.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0701.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0669.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0670.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0675.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0668.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/20120813_145652-1.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/20120813_145638.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/20120813_145629.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0700.jpg
http://i1263.photobucket.com/albums/ii640/Justin_Goff/IMAG0699.jpg
 
Last edited:

J_Kane

Member
Established Member
Joined
Mar 22, 2011
Messages
180
Location
MA
Nice 04 for sure. Just a suggestion to post the IMG Code of the Photobucket images in your ad.

GLWS!
 

04blckkbcobra

Member
Established Member
Joined
Nov 13, 2010
Messages
120
Location
destin florida
I tried to make it so the pictures were on the ad but i didn't figure it out. I am not very advanced when it comes to that kind of stuff.
 

05satinGT

Tire Smoking Specialist
Established Member
Joined
May 11, 2010
Messages
9,177
Location
CT
That thing is absolutely sick. This is what I want my car to be like one day. GLWS
 

05 Mustang

New Member
Established Member
Joined
Dec 24, 2009
Messages
575
Location
Canton, Georgia
all, here are the pictures...OP - very sharp Cobra, GLWS!!

IMAG0698-1.jpg


IMAG0695.jpg


IMAG0701.jpg


IMAG0669.jpg


IMAG0670.jpg


IMAG0675.jpg


IMAG0668.jpg


20120813_145652-1.jpg


20120813_145638.jpg


20120813_145629.jpg


IMAG0700.jpg


IMAG0699.jpg
 

04blckkbcobra

Member
Established Member
Joined
Nov 13, 2010
Messages
120
Location
destin florida
Thanks for the compliments guys. I usually keep all the aluminum tanks and intake polished up spotless. the pics were just ones i had never intended for an ad to sell, I should have took some nice new pics with everything cleaner.
 

04blckkbcobra

Member
Established Member
Joined
Nov 13, 2010
Messages
120
Location
destin florida
yo turbotrail93, that car looks nasty bro. Those weld wheels are what i wanted to get for my cobra. Such a nasty mean look! Is it a solid rear axle car?
 

Wandering

New Member
Joined
Sep 18, 2012
Messages
2
Location
California
Very nice build man. Tried calling you yesterday and will try again today, have a couple of questions about the car and I would be interested in making a trip out to purchase if all sounds good. I'm a new poster here but have been lingering a while, pretty picky with modded cobras but I do like what you've done to it so far hah.

Shawn
 

stop2go41

Member
Established Member
Joined
Jan 20, 2012
Messages
273
Location
NC
sorry to high jack thread, turbotrail that is one sick ride, just made it my desk top!!
 

04blckkbcobra

Member
Established Member
Joined
Nov 13, 2010
Messages
120
Location
destin florida
I got a new tune on the Cobra. We added on to the intake and made it go into the fender well to keep the intake air cooler.
The car made 647 rwhp on the new tune at XXX performance. All we did was swap pulleys went from the 3.75 to the 3.5 pulley. I was real happy and thought it put down good power. Brad is the man and has been real good to me through the whole build I recommend XXX performance to everyone looking to mod there car.
 

Users who are viewing this thread



Top