How accurate is the boost gauge in the 09 500? Reason I ask is i just did the JLT combo and now I get up to 15psi in boost using a 2.6 pulley. Is this possible? I something jacked up?:shrug:
09 Boost Gauge and JLT PP.
- Thread starter livnpaintball2
- Start date
Not sure how accurate it is but I see the same on my 09. Had my JLT kit 2 1/2 yrs and have always seen 14-15 PSI on stock gauge.
Got 11-12 with just my 2.6 pulley. Stock guage bottoms out after my lower install. I would say that is close, but the stock guage accuracy is not good.
- Joined
- Sep 13, 2011
- Messages
- 815
It sounds about right, not that I have a pulley yet but plan on it. how does it feel? big difference?
What were you reading stock?
stock was 8 and now 15. The car feels alive now, best mod to date but I've only had it for a couple weeks.
Right on target.
My 08 stock was 9
with filter was 10
with 2.6 pulley 14
with ported blower and elbow 17.4 and stock exhaust
My 08 stock was 9
with filter was 10
with 2.6 pulley 14
with ported blower and elbow 17.4 and stock exhaust
Users who are viewing this thread
