10 second 04 Mach 1 Azure

beerformeplz

Kenne Bell Mach 1
Established Member
Joined
May 22, 2005
Messages
610
Location
Chesapeake
Motor and Trans:
Built 03 Cobra motor less than 5000 miles.
Mac long tube headers, prochamber midpipe, MAC dumps.
Powder coated valve covers, front timing cover pulley bridge.
Kenne Bell 2.4 Supercharger 3.5 upper pulley 6# lower. Makes 22#s of boost. Less that 200 miles on it.
Kenne Bell boost a spark.
Canton overflow tank and power steering tank. LFP intercooler reservoir.
Afco dual pass heat exchanger.
PA Super comp C-4 transmission with trans brake.
Ultimate Converters torque converter (around 4200 stall)
JW SFI bell housing
Reichard Racing flex plate
03 Cobra aluminum drive shaft.
Fuel:
55# injectors
Kenne Bell boost a pump.
Dual Cobra fuel pumps
Cobra tank
Rear end:
Welded torque boxes and axle tubes.
Moser 31 spline axles
Eaton differ.
UPR Pro series rear suspension package includes: Chrome-moly Adjustable Race Lower arms 2. Chrome-moly double adjustable race upper arms 3. Chrome-moly Anti-Roll bar with bearings 4. 7075 Billet Spherical housing bushing kit.
Moroso long wheel studs.
Front Suspension
Tubular K member
Front Coil-over
Lakewood 90/10 shocks
Moroso long wheel studs.
Kenny Brown full-length subframe connectors
Exterior mods
03 Cobra rocker panels
18x9 and 18x10 FR500 wheels (hypercoated)
Custom rear bumper cover (no mustang logo) not filled was made that way.
Interior:
Custom PRO 5.0 style roll bar
Autometer fuel pressure and boost gauges.
Dynojet Wideband Commander with air fuel gauge.
Custom mount Autometer trans temp gauge.
Hurst Quarterstick shifter with trans brake button.
Stock seats.
This car runs and drives beautiful. There is a rock chip on the front windshield and a chip on the hood paint by the shaker. I can drive the car to my work 25 miles on the interstate and the trans temperature gauges reads around 200 degrees. The car has only been to the track once with the new blower on it and it went 10.7 at 129mph. There probably another .5 in it as the converter is tight. I know I have left out some items so if there are any questions please call me at 757-376-1875. $25K
I will consider PARTIAL trades.
Pics to come.
 
Last edited:

beerformeplz

Kenne Bell Mach 1
Established Member
Joined
May 22, 2005
Messages
610
Location
Chesapeake
motor1-1.gif


motor3.gif


car5.gif


car4.gif


car6.jpg


gauge2.gif
 

03RedCobra

Active Member
Established Member
Joined
Nov 23, 2003
Messages
1,205
Location
Palo Alto, CA
When you say it's a "built 03 Cobra Motor", what exactly does it have in the way of Pistons, Rods, crank, Heads and Valve-job ???
 

beerformeplz

Kenne Bell Mach 1
Established Member
Joined
May 22, 2005
Messages
610
Location
Chesapeake
When you say it's a "built 03 Cobra Motor", what exactly does it have in the way of Pistons, Rods, crank, Heads and Valve-job ???

Stock heads and cams, manley rods and diamond pistons. We also used a complete wiring harness from an 03 cobra when we did the swap. Engine and body harness.
 

beerformeplz

Kenne Bell Mach 1
Established Member
Joined
May 22, 2005
Messages
610
Location
Chesapeake
Are they billet or H-beam Rods ?? Are the pistons the same compression as the '03 Cobra (8.2:1) ??

Thanks for answering all my questions !!! You're car is VERY nice, and I absolutely LOVE the Blue Mach's !!

I believe there the same compression and the svt manley rods.
 

Darko

Burn-N-Out
Established Member
Joined
Apr 15, 2008
Messages
4,454
Location
Orange County
How about my Mach and some $! lol, You have a stunning beautiful car sir! I dunno why you'd ever sell it! :bowdown:
 

Users who are viewing this thread



Top