If I want to gain 100 whp in my 03 Cobra, what is the cheapest/most reliable/best way to do this?
100 whp
- Thread starter gnats
- Start date
pulleys and ported blower best bang for your buck!!!
Steig IV port, 2.8 pulley, custome tune, CAI, and catback.
gnats said:
Cheapest way is a 100 shot.
search, simple bolt ons
Don't forget about the suspension and most importantly an IRS brace.
A 2.8 pulley with all the usual goodies, catback, and CAI will get you pretty close. With a typical Terminator putting down 360 RW, adding a 2.8 and a tune will get you near 460 RW, if not beyond it.
2.95's put you in the 450 RW range, 2.8's have gone beyond 470 RW on an unported Eaton. The unported Eaton hits a wall at around 500 RW, if you want to pass that, you're going to have to add gas, or change your compressor configuration.
FWIW, an old style (and new style, evidently) Whipple at minimum boost, with all the supporting elements, puts you at 540 RW, about where a level 4 port is.
Heat is another issue.
Mike
2.95's put you in the 450 RW range, 2.8's have gone beyond 470 RW on an unported Eaton. The unported Eaton hits a wall at around 500 RW, if you want to pass that, you're going to have to add gas, or change your compressor configuration.
FWIW, an old style (and new style, evidently) Whipple at minimum boost, with all the supporting elements, puts you at 540 RW, about where a level 4 port is.
Heat is another issue.
Mike
Users who are viewing this thread
