VMP 5"/123mm ID Slot-Style MAF Housing for use in suck-through applications. Annodized black. 6.5" long. Takes 6" filter on inlet side, and ~5" coupler on outlet side. Not recomended for blow-through due to short length and no bead rolling to hold couplers under boost.
Largest on the market, great for high-HP roots and twin screw blower applications.
Our design uses a 6.5" long housing to further smooth and stabilize airflow across the MAF, which helps with signal quality when using such a large housing.
This housing has been tested on GT500s and provides a clean signal when used with the 05+ slot style sensor.
Recomended power range: 500 RWHP - 1000 RWHP
Use OEM slot-style sensor to achieve 500-650RWHP worth of range.
Use extender device to increase range beyond that.
Use PMAS HPX sensor will give 1000+RWHP worth of range.
*sensor pictured but not included
Recomended for vehicles running roots style blowers and making more than 500RWHP, including 03/04 Cobra, 99-04 Lightning, and Shelby GT500.
Our design does not bend the metal tabs on the MAF sensor.