14 F150 Aluminator FX2

[Russo]

Truck has 3.73 gears, Eaton LSD, Volant Intake, and the above parts are being installed as we speak. ;-)

 

[Russo]

motor is in!

 

[TVSF150FX4]

What power adder are u going with

 

[SID297]

Nice.

 

[Russo]

What power adder are u going with

Probably going to go with Procharger. I'm shooting for 600 whp until I can get the transmission built.

 

[Russo]

truck made 343 whp 350 wtq @ 6100 rpm.. HP Tuners is having an issue on the 14 F150s where there's a hard line code that limits the PCM to 6100, so once they figure that out we will push it to 7500.. im thinking it'll make 370ish whp.

 

[ScreamingFast]

Very nice! What stall?

 

[autoworks_FL]

So what made you yank the motor? Can't wait to see whats next.

 

[Russo]

Converter is the 258mm set at 3000 rpm. My old motor developed a slightly low compression in #7 so I decided to swap. It would have cost me more to tear the old motor down and rebuild it than what I got the Aluminator for. My old motor is for sale too, $2000!

 

[Russo]

Put the truck back on the dyno and raised the limiter to 6500. It made 357/365 @ 6500 rpm

 

[raceme2]

who do you plan on doing the transmission. And what can you do to these tranny`s to handle the power?

 

[Russo]

Got a new tranny pan and installed drop shackles

 

[Russo]

who do you plan on doing the transmission. And what can you do to these tranny`s to handle the power?

To my understanding the 6r80s are good for 600 whp. Other than a converter and cooling mods, I'm sure you can build it like anything else.

 

[Russo]

painted the COP to match the Appearance Package emblems

 

[imelmo]

It would have cost me more to tear the old motor down and rebuild it than what I got the Aluminator for. My old motor is for sale too, $2000!

How much did you pick up the Aluminator for?

.

 

[Russo]

How much did you pick up the Aluminator for?

.

$8k