19 x 11 Rear and 19 x 10 front

Im running Michelin 275 front 305 rear

Sent from my SM-G930V using Tapatalk

 

19

Sent from my SM-G930V using Tapatalk

 

Have 285-20-35 in front 10"-- 305-20-35 rear 11". About to drop my car With BMR springs. I've been doing research and these seem to be the springs that lower the least amount in the rear .5 and 1.25 in the front. I am hoping i dont run into any issues . Worried cause rims are wide. But are meant for this car.

 

Well depending on you offset. But i am pretty sure thats to much. 305/35/20 hieght is 28.4 the size you want is 26.7 difference is 1.7 . I know someone who is running a 305/35/20 with a 1" drop in the rear and it rubs a lot . In the front with 19" i am pretty sure you'll be fine with pretty much any drop. But the rear has less clearance thats why i went with the BMR .5 drop. Not because they were my favorite. But because they were the only ones that i have found that have a moderate drop in the rear. You might be able to get away with the 1" drop in the rear. The tire you want is a .85 smaller all the way around. The only thing that i would worry about Is the tire being 1" wider. Hope that helps. Lmk if it was confusing lol

 

Sorry forgot to mention even with the .5 drop i dont even know if my 305/35/20 are gonna clear, hopefully. Sometimes we have to take a chance to get the look we want lol. Will let you know how it goes. Everything i wrote was based on car being able to be aligned. With - camber i guess anything will fit lol.

 

I'm running 20x10 front 275/35/20
20x11 in rear 315/35/20 on Nitto Nt05's
No rubbing issues


Sent from my iPhone using the svtperformance.com mobile app

 

Is that your yellow mustang. Doesn't look like its droped in the rear. Also looks like it has negitive camber am i wrong. Thanks anything will help lowering my car this weekend.

 

No it's not my mustang I liked the wheels so I gotten the picture on line when I was looking for wheels I posted the wrong one I will up date the picture sorry, no mine isn't lowered I was wanting to but I don't think I can mine looks about like that one, and no I haven't done any mods to the suspension


Sent from my iPhone using the svtperformance.com mobile app

 

Ok i have the same wheels the yellow car has. Mine is not dropped yet but i do have those same wheels on my car. My worry is when i drop the car. Spoke to kelly at bmr today and he told me i shouldnt have a problem when i lower car. Will see lol gonna do it this weekend

 

Yeah I bought the 6GR wheels at need for speed out of California and he told me that it wouldn't be a problem to lower it, but it looks mighty close to me. When you do it let me know how it goes


Sent from my iPhone using the svtperformance.com mobile app

 

Ok i live right by them . I want to lower car but have a correct alignment. I dont like the neg. camber look. Hopefully i can do it. I have 305 and you have 315 that could be a problem bit maybe not. will let you know

 

How did it all work out for you? What did you end up putting on rear and front for tire sizes? What tires did you go with too? Thanks.

 

315/35/20 rear offset +50 nitto nto5
285/35/20 front offset +35 nitto nto5

 

I have 19x10 and 19x11 with 275/35/19 305/35/19 Michelin super sports for my v6. Just got them mounted Friday and the should be on next weekend. I'll post pics.


Sent from my iPhone using the svtperformance.com mobile app

 

Is you car lowered running those wheels?


Sent from my iPhone using the svtperformance.com mobile app

 

No, it looks like it is with the offset and the size of the wheels, it feels the fender gap up nicely