Fullsizerst
New Member
Whats going on guys , im a newbi here but I'm trying to sell my car as a roller , every thing is still on the car but the motor and I'm not parting it out ,
Located in New Orleans Louisiana
I tried to list everything below and at this point my wife says its got to go and I'm willing to take me loss
And the motor,heads,intake,carb and everything will be included with a good Enuff offer and I will entertain all offers so don't be shy and I know I'm going to take a huge loss but in this case it truly is my loss is your gain
Wanting to get about 9000.00 as it sits BUT I will entertain all offers
Here is the description
1984 Ford Mustang LX Coupe that has been built from ground up with all the best parts. This has a 331 through a 327 bored 4.000 over. Its a 327 Comp Hawk Long Block crate engine from D&G motorsports. The motor has all forged internals and It wears a set of AFR 185/58 heads, scorpion 1.6 3/8 roller rockers, custome ground cam, mac equal length shorty headers, BBK off road h-pipe, and mac after cat exhaust. The interior is all new and has a six point roll cage, race seats, 5 point harness, new carpet, dash, leather rear seat cover, etc. It has a Tremec TKO road race .82 transmission 5 speed sporting a Steeda tri-ax short throw shifter with a lakewood bell housing The rear end is a built 8.8 inch and has 3.55 gears. All brakes have been upgraded to cobra racing disc brakes with five lug. The exterior is also in great shape and the paint is only a few years old (front lower valance the paint is flaking off a little bit) I have a complete build book and reciepts for just about everything on the car. It has right at $35,000 invested in it and this is getting all parts between 30-50% off, so it would cost well over $50,000 to duplicate this car today. ,
I only drive the car maybe twice a month and it stays in my garage other than that so it only has 6880 miles on it since the build. Everything on the car has been gone threw and replaced or rebuilt ,
I have included part numbers and description of most of the parts on the car below:
MOTOR:
DD327CHL425 - 425HP327 COMP HAWK LONG BLOCK
M6010A50 - Stock Replacement Block 5.0L HO/302, Production Block 8.206'' Deck Hieght
CATCK0302A - 5140 FORGED STEEL, 3.250 STROKE, 2.2486 MAIN, 2.132 ROD
CATCRS5400G - 4340 FORGED STEEL H-BEAM ROD, 5.400 LENGTH, .927 PIN, 610 GRAM
PRO12347STD - PROBE FORGED PISTON 3.250 STROKE, 5.400'' ROD, 1.175 C/H, .927 PIN STANDARD
AC9771035 - AKERLY & CHILDS XTREME MOLY RINGS
CLECB634H - CLEVITE 302 ROD H BEARING
CLEMS590H - CLEVITE 302 MAIN H BEARING
DDMSS12 - LASER CUT MAIN SUPPORT WITH ARP STUDS
DDCAM - CUSTOM GROUND HYDRAULIC ROLLER CAMSHAFT
M6500R302 - MOTORSPORT302/351 EFI HYDRAULIC LIFTER
M6253A50 - FORD MOTOERSPORT HYDRAULIC ROLLER SPIDER ASSEMBLY
AMP302351 - AMP SMALL BLOCK FORD BILLET TIMIMG SET
MELM68HV - MELLING HIGH VOLUME 302 OIL PUMP
MANMPR - MANLEY HARDENED PUSH RODS
SCP1017 - SCORPIAN 1.6 3/8 ROLLER ROCKER
AFR1388 - AFR SBF, NO EGR OR AIR PUMP STRIP HEAD 58CC CHAMBERS, STUD MOUNT, COMPLETE WITH PARTS
CANT5620S - 7QT OIL PAN, PICK UP AND DIP STICK
GPT-1282010 - 650 SPEED DEMON MECHANICAL CARBURETOR
EDL-7521 EDLEBROCK PERFORMER RPM AIR GAP INTAKE MANIFOLD
KN663050 - K&N X STREAM AIRFLOW ASSEMBLY
12-289-13 HOLLEY 130+GPH FUEL PUMP
TRANSMISSION/DRIVETRAIN
TCET5008 - TKO 600 ROAD RACED VERSION .82
LAK15202 - LAKEWOOD SFI BELLHOUSING
KP-5150 - BILLARD SHIFTER KNOB 5-SPEED
5557453 - STEEDA TRI-AX SHIFTER FOR TREMEC
M4602G - FORD RACING 3.5'' DIA HD ALUMINUM DRIVE SHAFT
1806TA - 8.8'' ALUMINUM DIFFERENTIAL COVER
M4006B355 - FORD RACING 8.8'' TRAC LOC 3.55:1 RATIO REAR AXLE ASSEMBLY
00128635 - SPEC STAGE 3 CLUTCH
IGNITION
CRN-6000-6440 - CRANE CAMS HI-6 IGNITION BOX
CRN-730-0892 - CRANE CAMS LX92 RACE E-CORE IGNITION COILS
CRN-1000-1603 - CRANE CAMS PRO-CURVE BILLET DISTRIBUTOR
FMS-M12259C301 - FORD MOTORSPORTS PLUG WIRES
PWM-8-57100 - 100 AMP FORD RACING ALTERNATOR
SUSPENSION
MMRTB-1 - MAXIMUM MOTORSPORTS ROAD & TRACK BOX
MM Road & Track Springs
MM Caster/Camber Plates
Bilstein struts
Bilstein shocks
Front and rear Urethane Spring Isolators
Urethane Pinion Snubber (solid axle Mustangs)
MM XL Series Full-length Subframe Connectors
MM Strut Tower Brace
MM 4-Point K-Member Brace
MM Panhard Bar with Aluminum Rod
MM Heavy-duty Rear Lower Control Arms
MM Solid Steering Shaft
MM Solid Steering rack Bushings
Front Swaybar bushings
Front Swaybar end links
Front control arm bushings, urethane
M3075A - FORD RACING FRONT LOWER CONTROL ARM KIT
M5500A - FORD RACING UPPER REAR CONTROL ARM KIT
5551087 - STEEDA 1 3/8'' TUBULAR FRONT SWAY BAR KIT
56619711 - STEEDA HEAVY DUTY REAR SWAY BAR KIT
7993-102 - D&D TUBULAR K-MEMBER
INTERIOR
MMDRRB-2 - MAXIMUM MOTORSPORTS 6-POINT DRAG RACE ROLL BAR WITH SWING OUT DOOR BARS
COB-5001 - COBRA MONACO BLK/PRVNYL RACE SEATS
GFR-7000BK - G-FORCE CAM LOCK 5-POINT RACING HARNEST
F79807 - COUPE/HATCH DARK GRAY CARPET(MUSTANGS UNLIMITED)
LRS1769 - COUPE HEADLINER KIT
C12105 - BLACK DASH COVER (MUSTANGS UNLIMITED)
SB1559 - COUPE BLACK SUNVISOR PAIR
017-30-4100 - AEM WIDEBAND UEGO CONTROLLER (GAUGE)
EXHAUST
9028690 - MAC PERFORMANCE 1 5/8'' EQUAL LENGTH SHORTY HEADERS
BBK-1507 - BBK PERFORMANCE CNC SERIES OFF-ROAD RACE H-PIPE
TK408692 - MAC PERFORMANCE MUSTANG TRU FIT CAT BACK 2 1/2'' EXHAUST SYSTEM
COOLING
M8005C - FORD RACING 3 ROW ALUMINUM RADIATOR
175F - BLACK MAGIC ELECTRIC FAN KIT
ST-5550606 - STEEDA BLACK ALUMINUM RADIATOR BRACKET
BRAKES/WHEELS/TIRES
M2300K - FORD RACING COBRA DISC BRAKE PKG FRONT/REAR
164-111-HPS - STEEDA HIGH PERFORMANCE STREET FRONT PADS
164-183-HPS - STEEDA HIGH PERFORMANCE STREET REAR PADS
M1007M179 - FORD RACING COBRA "R" (17''X9'') 5-LUG SILVER WHEEL
545ZR7RE730 - BRIDGESTONE POTENZA RE730 255/45ZR17
EXTERIOR
CO70BRBC - COBRA STYLE REAR BUMPER
3170 - XENON GROUND EFFECTS KIT
PY1589B - BLACK DOOR LOCK KIT
F2680 COWL TOP VENT GRILLE
ALSO HAS NEW COWL HOOD, HEAD LIGHTS AND TAIL LIGHTS BUT I DONT KNOW THE PART #S, CANT FIND RECEIPT
STERO/SPEAKERS
CDA9820XM - ALPINE AM/FM/CD WITH BUILT IN XM TUNER
XMMICRO - ROOF MOUNT XM ANTENNA
MMC525 - POLK 5.25'' CARBON COAXIAL SPEAKER WITH TWEETERS (FRONT DOORS)
MMC570 - POLK 5''X7'' CARBON COAXIAL SPEAKER WITH TWEETER (REAR DASH
Here is some pics
Located in New Orleans Louisiana
I tried to list everything below and at this point my wife says its got to go and I'm willing to take me loss
And the motor,heads,intake,carb and everything will be included with a good Enuff offer and I will entertain all offers so don't be shy and I know I'm going to take a huge loss but in this case it truly is my loss is your gain
Wanting to get about 9000.00 as it sits BUT I will entertain all offers
Here is the description
1984 Ford Mustang LX Coupe that has been built from ground up with all the best parts. This has a 331 through a 327 bored 4.000 over. Its a 327 Comp Hawk Long Block crate engine from D&G motorsports. The motor has all forged internals and It wears a set of AFR 185/58 heads, scorpion 1.6 3/8 roller rockers, custome ground cam, mac equal length shorty headers, BBK off road h-pipe, and mac after cat exhaust. The interior is all new and has a six point roll cage, race seats, 5 point harness, new carpet, dash, leather rear seat cover, etc. It has a Tremec TKO road race .82 transmission 5 speed sporting a Steeda tri-ax short throw shifter with a lakewood bell housing The rear end is a built 8.8 inch and has 3.55 gears. All brakes have been upgraded to cobra racing disc brakes with five lug. The exterior is also in great shape and the paint is only a few years old (front lower valance the paint is flaking off a little bit) I have a complete build book and reciepts for just about everything on the car. It has right at $35,000 invested in it and this is getting all parts between 30-50% off, so it would cost well over $50,000 to duplicate this car today. ,
I only drive the car maybe twice a month and it stays in my garage other than that so it only has 6880 miles on it since the build. Everything on the car has been gone threw and replaced or rebuilt ,
I have included part numbers and description of most of the parts on the car below:
MOTOR:
DD327CHL425 - 425HP327 COMP HAWK LONG BLOCK
M6010A50 - Stock Replacement Block 5.0L HO/302, Production Block 8.206'' Deck Hieght
CATCK0302A - 5140 FORGED STEEL, 3.250 STROKE, 2.2486 MAIN, 2.132 ROD
CATCRS5400G - 4340 FORGED STEEL H-BEAM ROD, 5.400 LENGTH, .927 PIN, 610 GRAM
PRO12347STD - PROBE FORGED PISTON 3.250 STROKE, 5.400'' ROD, 1.175 C/H, .927 PIN STANDARD
AC9771035 - AKERLY & CHILDS XTREME MOLY RINGS
CLECB634H - CLEVITE 302 ROD H BEARING
CLEMS590H - CLEVITE 302 MAIN H BEARING
DDMSS12 - LASER CUT MAIN SUPPORT WITH ARP STUDS
DDCAM - CUSTOM GROUND HYDRAULIC ROLLER CAMSHAFT
M6500R302 - MOTORSPORT302/351 EFI HYDRAULIC LIFTER
M6253A50 - FORD MOTOERSPORT HYDRAULIC ROLLER SPIDER ASSEMBLY
AMP302351 - AMP SMALL BLOCK FORD BILLET TIMIMG SET
MELM68HV - MELLING HIGH VOLUME 302 OIL PUMP
MANMPR - MANLEY HARDENED PUSH RODS
SCP1017 - SCORPIAN 1.6 3/8 ROLLER ROCKER
AFR1388 - AFR SBF, NO EGR OR AIR PUMP STRIP HEAD 58CC CHAMBERS, STUD MOUNT, COMPLETE WITH PARTS
CANT5620S - 7QT OIL PAN, PICK UP AND DIP STICK
GPT-1282010 - 650 SPEED DEMON MECHANICAL CARBURETOR
EDL-7521 EDLEBROCK PERFORMER RPM AIR GAP INTAKE MANIFOLD
KN663050 - K&N X STREAM AIRFLOW ASSEMBLY
12-289-13 HOLLEY 130+GPH FUEL PUMP
TRANSMISSION/DRIVETRAIN
TCET5008 - TKO 600 ROAD RACED VERSION .82
LAK15202 - LAKEWOOD SFI BELLHOUSING
KP-5150 - BILLARD SHIFTER KNOB 5-SPEED
5557453 - STEEDA TRI-AX SHIFTER FOR TREMEC
M4602G - FORD RACING 3.5'' DIA HD ALUMINUM DRIVE SHAFT
1806TA - 8.8'' ALUMINUM DIFFERENTIAL COVER
M4006B355 - FORD RACING 8.8'' TRAC LOC 3.55:1 RATIO REAR AXLE ASSEMBLY
00128635 - SPEC STAGE 3 CLUTCH
IGNITION
CRN-6000-6440 - CRANE CAMS HI-6 IGNITION BOX
CRN-730-0892 - CRANE CAMS LX92 RACE E-CORE IGNITION COILS
CRN-1000-1603 - CRANE CAMS PRO-CURVE BILLET DISTRIBUTOR
FMS-M12259C301 - FORD MOTORSPORTS PLUG WIRES
PWM-8-57100 - 100 AMP FORD RACING ALTERNATOR
SUSPENSION
MMRTB-1 - MAXIMUM MOTORSPORTS ROAD & TRACK BOX
MM Road & Track Springs
MM Caster/Camber Plates
Bilstein struts
Bilstein shocks
Front and rear Urethane Spring Isolators
Urethane Pinion Snubber (solid axle Mustangs)
MM XL Series Full-length Subframe Connectors
MM Strut Tower Brace
MM 4-Point K-Member Brace
MM Panhard Bar with Aluminum Rod
MM Heavy-duty Rear Lower Control Arms
MM Solid Steering Shaft
MM Solid Steering rack Bushings
Front Swaybar bushings
Front Swaybar end links
Front control arm bushings, urethane
M3075A - FORD RACING FRONT LOWER CONTROL ARM KIT
M5500A - FORD RACING UPPER REAR CONTROL ARM KIT
5551087 - STEEDA 1 3/8'' TUBULAR FRONT SWAY BAR KIT
56619711 - STEEDA HEAVY DUTY REAR SWAY BAR KIT
7993-102 - D&D TUBULAR K-MEMBER
INTERIOR
MMDRRB-2 - MAXIMUM MOTORSPORTS 6-POINT DRAG RACE ROLL BAR WITH SWING OUT DOOR BARS
COB-5001 - COBRA MONACO BLK/PRVNYL RACE SEATS
GFR-7000BK - G-FORCE CAM LOCK 5-POINT RACING HARNEST
F79807 - COUPE/HATCH DARK GRAY CARPET(MUSTANGS UNLIMITED)
LRS1769 - COUPE HEADLINER KIT
C12105 - BLACK DASH COVER (MUSTANGS UNLIMITED)
SB1559 - COUPE BLACK SUNVISOR PAIR
017-30-4100 - AEM WIDEBAND UEGO CONTROLLER (GAUGE)
EXHAUST
9028690 - MAC PERFORMANCE 1 5/8'' EQUAL LENGTH SHORTY HEADERS
BBK-1507 - BBK PERFORMANCE CNC SERIES OFF-ROAD RACE H-PIPE
TK408692 - MAC PERFORMANCE MUSTANG TRU FIT CAT BACK 2 1/2'' EXHAUST SYSTEM
COOLING
M8005C - FORD RACING 3 ROW ALUMINUM RADIATOR
175F - BLACK MAGIC ELECTRIC FAN KIT
ST-5550606 - STEEDA BLACK ALUMINUM RADIATOR BRACKET
BRAKES/WHEELS/TIRES
M2300K - FORD RACING COBRA DISC BRAKE PKG FRONT/REAR
164-111-HPS - STEEDA HIGH PERFORMANCE STREET FRONT PADS
164-183-HPS - STEEDA HIGH PERFORMANCE STREET REAR PADS
M1007M179 - FORD RACING COBRA "R" (17''X9'') 5-LUG SILVER WHEEL
545ZR7RE730 - BRIDGESTONE POTENZA RE730 255/45ZR17
EXTERIOR
CO70BRBC - COBRA STYLE REAR BUMPER
3170 - XENON GROUND EFFECTS KIT
PY1589B - BLACK DOOR LOCK KIT
F2680 COWL TOP VENT GRILLE
ALSO HAS NEW COWL HOOD, HEAD LIGHTS AND TAIL LIGHTS BUT I DONT KNOW THE PART #S, CANT FIND RECEIPT
STERO/SPEAKERS
CDA9820XM - ALPINE AM/FM/CD WITH BUILT IN XM TUNER
XMMICRO - ROOF MOUNT XM ANTENNA
MMC525 - POLK 5.25'' CARBON COAXIAL SPEAKER WITH TWEETERS (FRONT DOORS)
MMC570 - POLK 5''X7'' CARBON COAXIAL SPEAKER WITH TWEETER (REAR DASH
Here is some pics
Last edited: