1993 Cobra w/ B303 cam:Stock Pushrods?

[Jason G]

Just like the title says. I have a 93 Cobra, motor is stock except for a FRPP B303 cam. I want to be sure that the pushrods (stock) that were used were the proper length when this cam was put in (By previous owner). So my question is what length pushrods are needed with this cam in the 93 cobra motor (1.7 rockers, etc.). Will the stock length pushrods work? Any input or experiences are welcome. Thanks in advance.

 

[got hp]

I will answer your question before the forum police show up :lol:

Yes the pushrods are the same length (stock) when using the Ford Racing cams since they have the same base circle as the stock cam. You start getting into trouble when you go aftermarket cams like Crane or Comp with smaller base circles which require you to go with longer pushrods. Hope this helps.

 

[Jason G]

This helps a lot. Thanks. What forum should I have posted this in anyway?

 

[FordSVTFan]

This one!!

 

[Jason G]

thanks