1998 Cobra; Procharged, Forged, Suspension WTT4GSXR

Venomous281

Texas Bandit
Established Member
Joined
Nov 14, 2004
Messages
1,333
Location
South Padre Island Tx.
1998 Cobra; Procharged, Built motor, rear end, full suspension Will take 13k

Up for sale is my project for the last three years. My 1998 SVT Cobra. I bought the car when i was a senior in high school, and i bought it from a guy up in dallas who had had it in his barn for about three years. We went andd picked it up and brought it home. We finally got it started after a new pats key was made and a new fuel pump was put in. After we turned it on we discovered it had a blown head gasket. So the rebuild began, the first time around it was a stock rebuild. One night it lost oil pressure and the motor siezed(I have pictures). Now it has a fresh motor maybe about 1500 miles on it, the rear end has about 500 miles, The Spec III and rebuilt T45 have about 200, All the suspensio has about 200 miles aswell. AC blows real cold, the car retains all its creature comforts and by all means is a TRUE STREET CAR. The reason i am selling the car is because I dont drive the car that often anymore and It just sits in my garage, And well my dad bought a new toy(32 T bucket) and we can use the extra space to finish building my cousins 63 Falcon. The car runs extremely strong and there is nothing wrong with it. It is a clean title and i do have the title on hand.

The mods to the car are: Tekside block .020 over, New Cobre Crank, Manley H beam forged rods, Manley Platinum series Forged pistons, Ported Heads, Ported Short runner intake, Accufab *SPECIAL* TB, Procharger P1SC 12psi, FRPP 42lbers, FRPP 90mm maf, BBK LT headers, BBK OR X, Bassani catback, Walbro 255LPH Power adder pump, FRPP wires, NGK TR6's, Aeromotive fuel reg, Rebuilt T45, Spec III, Dallas Mustang adj. clutch cable, DM 3 pickup quad, Firewall adj(not on car yet), Steeda Tri Ax, UPR trick stick, Lakewood Driveshaft safety loop, Strange 31 spline axles, FRPP 31 spline carrier, Saleen Girdle(still in box), FRPP 4.30 gears, QA1 tubular K member, QA1 tubular A arms, QA1 coil over kit, QA1 175lb springs, Lakwood 90/10 drag struts, Eibach rear drag springs, KYB Gas-A-Just rear shocks, Kenny Brown subframe sonnectors, KB underbody brace, KB Strut tower brace and KB front sway bar(off the car but i still have them) Tuning is done by SCT Pro racers Package Advantage 3.0 with a base tune from Modular Depot.

I am asking 16k but im willing to trade for a GSXR plus cash. More that likely i want a 1000. PM me if interested or call me at (956)466-1906

In its current stage with 03 cobra clones
Cynthia325.jpg

Cynthia326.jpg

Cynthia327.jpg

Cynthia330.jpg

Cynthia331.jpg

Cynthia332.jpg

Cynthia333.jpg

Cynthia334.jpg

Cynthia335.jpg

Cynthia336.jpg

Cynthia337.jpg

Cynthia338.jpg

Cynthia340.jpg

Cynthia341.jpg

Cynthia342.jpg

200501.jpg


With the old 95 Cobra R's
200493.jpg

200494.jpg

200495.jpg

200496.jpg

200497.jpg

200498.jpg

200499.jpg

200500.jpg
 
Last edited:

FATPAUL

To The Bat-Mobile!
Established Member
Joined
Jan 19, 2007
Messages
2,428
Location
Austin,TX
Ooo i want to see it with the 03 replicas i may change my mind lol what are the hp#'s?
 

Venomous281

Texas Bandit
Established Member
Joined
Nov 14, 2004
Messages
1,333
Location
South Padre Island Tx.
I will get some pictures up tomorrow morning before i go to class. 03indeed do you have any pics of the bike? i saw some on your cardomain an orange one and a black one. How much were you willing to give me along with the bike?
 

Turkish

The Perpetrator
Established Member
Joined
Mar 29, 2006
Messages
3,093
Location
KY
What's the mileage on the odometer? How's the paint and the interior?
 

Venomous281

Texas Bandit
Established Member
Joined
Nov 14, 2004
Messages
1,333
Location
South Padre Island Tx.
DRK281 I havent taken it to the dyno yet but i know there is a lot left in it because its running super rich. Turkish the odometer reads 111,xxx the paint is pretty good. The older man who owned it before me had it in a warehouse along with some other impressive cars. It has some swirl marks but i need to clay bar, wax then swirl remover. The interior is nice no rips on the leather. The seats are from a GT i bought with 22k miles on it.
 

Venomous281

Texas Bandit
Established Member
Joined
Nov 14, 2004
Messages
1,333
Location
South Padre Island Tx.
The header panel where the windshield wipers go is coming from the dealer along with the windshield wipers. Just something i have never done. When i bought the car its been like that. I bought the car with 108,xxx miles on it. I have only pur about 3-4k miles in the last three years.
 

Users who are viewing this thread



Top