FOR SALE: 1999 Cobra, 5.0 FR500, T56, MM, FTB, Brembo

TMCCOY

New Member
Established Member
Joined
Apr 7, 2024
Messages
10
Location
Utah
49K Miles on chassis, 37k on engine and drivetrain. 5.0 Boss block with FR500 Heads, custom cams, Billet I beam rods, built 26 spline T56, 414rwhp at 7k. Very nice vehicle, sounds incredible. Always receives comments on the sound. No cats. SCT programmer included for future tuning/emissions changes. $27k.

Contact me for additional information.

Hot idle:


Chassis
  1. IRS
    1. All bushings replaced with greasable Delrin (Full Tilt Boogie)
    2. Upgraded cradle mounts
    3. Upgraded urethane diff mounts
    4. Detroit truetrac differential, 31 spline, with 3.73 gears
    5. 03/04 Cobra Axles
    6. Maximum motorsports coil overs, Tokico struts
    7. MM HD crossmember
    8. Heim HD tierod and bumpsteer kit
  2. Front Suspension
    1. MM coil over kit Koni Struts
    2. MM Caster/Camber kit
    3. MM Kmember, A Arms/delrin bushings
    4. MM Adj. Tie rod ends, bump steer kit, solid rack bushings
  3. Chassis
    1. MM full length subframe connectors
    2. MM Strut tower brace
    3. Rear shock tower chassis brace (in trunk)

Drivetrain/Brakes/Wheels
  1. T56 6-speed transmission, built with CF clutches, Billet input shaft, 26 spline input, MGW Shifter
  2. Ford Billet steel SFI flywheel
  3. Ram clutch (650hp rated)
  4. MM Clutch quadrant
  5. 11" clutch, UPR double lock firewall adjuster
  6. Brembo 14" front brake, 13" rear brake conversion
  7. AL Dynotech driveshaft
  8. 18" 5 spoke wheels
  9. 275/35-18 Nitto NT05 Front
  10. 295/35-18 Nitto NT05 Rear

Engine 1,800hp capable / Performance
  1. Boss 5.0 Iron Race Block
  2. Cobra Forged Crank
  3. Innovators west damper
  4. Manley billet I beam rods
  5. Custom diamond skirt and top coated forged pistons
  6. Moroso 10qt road race oil pan
  7. Oil filter relocation
  8. FR500 cylinder heads
  9. Custom billet Bullet Racing cams [email protected], .475 lift
  10. Custom, Race (HD) secondary chains and gears
  11. Custom full metal/welded ported short running cobra intake - no epoxy!
  12. Griffin Aluminum radiator
  13. 39lb injectors
  14. Lightning 90mm MAF
  15. KB boost a pump
  16. Upgraded FIPDM
  17. 03/04 Cobra fuel tank and dual pumps
  18. Magnaflow catback
  19. SLP 1 3/4"long tube headers, X pipe
  20. SCT programmer

Interior
  1. Corbeau seats
  2. Aluminum pedals
 

Attachments

  • cobra.jpg
    cobra.jpg
    466.9 KB · Views: 51
  • cobra3.jpg
    cobra3.jpg
    414.6 KB · Views: 40
  • cobra5.jpg
    cobra5.jpg
    367.7 KB · Views: 39
  • IMG_0424.jpg
    IMG_0424.jpg
    325 KB · Views: 35
  • IMG_0428.jpg
    IMG_0428.jpg
    445.1 KB · Views: 38
  • IMG_0436.jpg
    IMG_0436.jpg
    390.8 KB · Views: 36
  • IMG_0446.jpg
    IMG_0446.jpg
    363.5 KB · Views: 38
  • IMG_0448.jpg
    IMG_0448.jpg
    335.7 KB · Views: 38
  • IMG_0450.jpg
    IMG_0450.jpg
    259.3 KB · Views: 45
  • IMG_0475.jpeg
    IMG_0475.jpeg
    316.9 KB · Views: 29
Last edited:

Users who are viewing this thread



Top