Curious to know people's setups making 600+ with the 2.3 Whipple on the 3v. I'm running DSS 302 stroker, stock ported heads, FRPP hot rod cams, full Mac exhaust, LT's, etc. made 550 on 93 at 17 psi. Inlet is restricting enough air flow for anymore boost according to Brent at Brenspeed who tuned the car. Looking to eventually get near the 700 mark which I know is possible at 15-17 psi. Next step is ID1000's and BAP for an e85 retune with a local tuner (Brent doesn't tune for e85 :shrug
.
Going to go one step at a time, I know the hot rods are holding it back but they sound so good so I'd like to see what I can make with those, possibly some Comp 127-450's if not satisfied. Some CNC ported heads might be down the road as well as I know there is more power to be had there, just unsure if it's enough to be worth the $$$.
. Going to go one step at a time, I know the hot rods are holding it back but they sound so good so I'd like to see what I can make with those, possibly some Comp 127-450's if not satisfied. Some CNC ported heads might be down the road as well as I know there is more power to be had there, just unsure if it's enough to be worth the $$$.
