Hi guys,
I have a 2.6 KB with full exhaust, 3.25 upper, Metco 4lb lower, LFP idler aux pulley
I always have a problem in belt , before it was slipping after I install LFP ilder, no slipping
now, The problem is the boost was not go more than 18-19lb
It should give me 22+lb
Before I install the idler boost was 20lb exactly, Belt size was 78'
LFP told me that It should be bigger for 1'' after installing the idler so I got Goodyear 79''
finally, I was testing the car with idler and the belt cut in 2nd test at the same time
BTW : I sow that the hood inner layer is tuching the s/c pulley and it eat the layer, you can see the inner side of hood clear, the pulley burend the layer under the hood !!!!!
( 2 problems : boost and belt cut )
What could be the solution for this ?
To go for bigger belt, I will loose more boost !!
Please help guys
Thanks all
I have a 2.6 KB with full exhaust, 3.25 upper, Metco 4lb lower, LFP idler aux pulley
I always have a problem in belt , before it was slipping after I install LFP ilder, no slipping
now, The problem is the boost was not go more than 18-19lb
It should give me 22+lb
Before I install the idler boost was 20lb exactly, Belt size was 78'
LFP told me that It should be bigger for 1'' after installing the idler so I got Goodyear 79''
finally, I was testing the car with idler and the belt cut in 2nd test at the same time
BTW : I sow that the hood inner layer is tuching the s/c pulley and it eat the layer, you can see the inner side of hood clear, the pulley burend the layer under the hood !!!!!
( 2 problems : boost and belt cut )
What could be the solution for this ?
To go for bigger belt, I will loose more boost !!
Please help guys
Thanks all