Relocating to another city for my career and have to sell my project. 2001 Cobra. 112k. Built a stroker/d1sc combo 2 years ago. Made just under 800 rwhp. 10,000 mi later cracked 2 sleeves in the WAP block. Pulled the motor again. Got halfway through the second build and got a job offer I can't refuse. My wife and I are both changing jobs, relocating, and there is just no time for me to finish this project. I will have enough time to get the shortblock together. I would like to sell the whole project together and am willing to take a big loss on all this stuff, but I need it gone. The only thing I don't have with it to make it run and drive is a clutch. Asking $10,000
97 Cobra teksid block .020" over, decked, line honed, torque plate honed by Livernois
Diamond flat tops 10.8:1 double coated with valve reliefs
Total Seal ap stainless top ring, cast iron napier second rings, standard oil ring 1.5mm, 1.5mm, 3mm
Oliver 5.85" billet steel rods
scat 3.75" stoker crank
04 cobra 9 thread heads cnc ported by TEA with Ferrea stanless valves. Flow 324in 275ex @.500" lift
Crower springs and ti retainers
Crower stage 3 blower cams [email protected]" .485" lift
ATI balancer
TSS oil pump
3v windage tray
Sullivan intake with rails.
Procharger carb hat that sits atop a Accufab 4150 throttle body.
D1SC with custom Treadstone intercooler set up.
03' cobra t56 mgw shifter
Drivshaft shop aluminum driveshaft
Wavetrac diff
Ford 3.73's
Fore innovations billet diff cover
04 cobra axles
FTBR greaseable delrin control arm bushings
MM urethane rear subframe bushings
MM urethane diff bushings
MM full length subframe connectors
03 Cobra fuel tank
Fore innovations twin pump fuel hat -10 out -8 return
Russell pro classic 2 Fuel hose -10 feed -8 return
Aeromotive -10 fuel filter
Fore innovations adjustable fuel pressure regulator
Deatschwerks 80lb/hr injectors
03 cobra wheels
HO fibertrends Cobra r hood
Autometer boost gauge
Innovate wideband
rear seat delete.
Kooks 1 3/4" headers
3" o/r x
Bassani 3" catback
Everything on the car was done by me except the machine work on the block and heads and balancing of the rotating assy. With the first stoker motor the car made 794 whp and 585 wtq on e85 tuned by me. Sorry for the sub par pics. I don't have many pictures of it. I took a video today of the run down.
[video=youtube;rg8y5M6YsDc]https://www.youtube.com/watch?v=rg8y5M6YsDc[/video]
[video=youtube;IH3t]https://www.youtube.com/watch?v=IH3t...e_gdata_player[/video]
97 Cobra teksid block .020" over, decked, line honed, torque plate honed by Livernois
Diamond flat tops 10.8:1 double coated with valve reliefs
Total Seal ap stainless top ring, cast iron napier second rings, standard oil ring 1.5mm, 1.5mm, 3mm
Oliver 5.85" billet steel rods
scat 3.75" stoker crank
04 cobra 9 thread heads cnc ported by TEA with Ferrea stanless valves. Flow 324in 275ex @.500" lift
Crower springs and ti retainers
Crower stage 3 blower cams [email protected]" .485" lift
ATI balancer
TSS oil pump
3v windage tray
Sullivan intake with rails.
Procharger carb hat that sits atop a Accufab 4150 throttle body.
D1SC with custom Treadstone intercooler set up.
03' cobra t56 mgw shifter
Drivshaft shop aluminum driveshaft
Wavetrac diff
Ford 3.73's
Fore innovations billet diff cover
04 cobra axles
FTBR greaseable delrin control arm bushings
MM urethane rear subframe bushings
MM urethane diff bushings
MM full length subframe connectors
03 Cobra fuel tank
Fore innovations twin pump fuel hat -10 out -8 return
Russell pro classic 2 Fuel hose -10 feed -8 return
Aeromotive -10 fuel filter
Fore innovations adjustable fuel pressure regulator
Deatschwerks 80lb/hr injectors
03 cobra wheels
HO fibertrends Cobra r hood
Autometer boost gauge
Innovate wideband
rear seat delete.
Kooks 1 3/4" headers
3" o/r x
Bassani 3" catback
Everything on the car was done by me except the machine work on the block and heads and balancing of the rotating assy. With the first stoker motor the car made 794 whp and 585 wtq on e85 tuned by me. Sorry for the sub par pics. I don't have many pictures of it. I took a video today of the run down.
[video=youtube;rg8y5M6YsDc]https://www.youtube.com/watch?v=rg8y5M6YsDc[/video]
[video=youtube;IH3t]https://www.youtube.com/watch?v=IH3t...e_gdata_player[/video]
Attachments
Last edited:
