2003 600rwhp kenne bell cobra (cheap)

04srt10man

New Member
Established Member
Joined
Aug 11, 2006
Messages
101
Location
flroida
2003 Zinc Yellow Vert. 37000 miles the car is in great cond. the top is perfect with no tears, the interior is in very good cond also with no rips or wear marks. 2.4 keene bell fresh rebuild, 60lb injectors, gt pumps, intake spacer, lfp 4lb lower, jlt cold air intake, mm lower bushings, fluidyne hE, kenne bell boost a spark and boost a pump, upr shifter, borla exhaust with bassani offroad x pipe(sounds great) sct tuner, predator tuner, Motor rebuild about 5000 miles ago(new valve seals, valves, bearings, gaskets, oil pump, arp main stud kit and head studs,manley connectig rods, cometic head gaskets, new rear main seal, oil cooler, diamond pistons, rps clutch, frame connectors, accufab big bore throttle body, bigair MAF unit, autometer boost and fuel Gauges mounted in the aftermarket gauge cluster....styling bar for convertable top, aluminum gas cover, 18 inch black chrome fr500 with michlins(new) the car dynoed right at 600rwhp i do have the dyno sheets.
i have all the receipts for the whole motor build. it came out to 13,000$ in just the motor build.. not counting the kenne bell charger, the fr500 wheels, the gauges, exhaust, intake, both tuners that i have. I also have almost all the parts that came off the car. i have the stock supercharger system, stock throttle body, intake, wheels, gas lid, so the car can be put back to stock if wanted.. or they can sell all the stock parts. i also have all the cobra documentation on the car. the original msrp etc. clean carfax and title 29,995$ e-mail me with any questions. [email protected]
mustang2.gif

mustang4.gif

mustang5.gif

mustang7.gif

mustang1.gif

mustang.gif
 
Last edited:

04srt10man

New Member
Established Member
Joined
Aug 11, 2006
Messages
101
Location
flroida
its not 30k its 29,995 obo. and as far as i saw on the site for a convertable and on ebay. 29,995 is a very fair price for a built motor kenne bell supercharged cobra.. i also have all the stock parts if someone wants it stock. also (1 quick4.6) your asking 29,900$ for your hard top with alot less stuff then mine.. so how am i over priced? make offer if your interested.. if not please don't post negative stuff in here
 
Last edited:

supermech21

New Member
Established Member
Joined
Aug 9, 2007
Messages
118
Location
Fayetteville NC
1Quick4.6 said:
yeah that aint cheap dude

i think its pretty fair....would be all over it except that yellow is the slowest color ;-) ....and verts arent my cup of tea but with the mods it as this is almost a steal....
 

1 BAD FOX

FNQWIC
Established Member
Joined
Oct 13, 2005
Messages
367
Location
bardstown ky
damn man im sorry.....that $5 will get somebody all kinds of stuff.....good luck with your sale....its definetly worth the money but i wouldnt call it cheap
 

04srt10man

New Member
Established Member
Joined
Aug 11, 2006
Messages
101
Location
flroida
lol i know its not cheap in general.. but for what is done to this car its a very good price.. and i am nego on the price
 

04srt10man

New Member
Established Member
Joined
Aug 11, 2006
Messages
101
Location
flroida
they are diamond pistons, it shows everything that was used in my ad.. sorry i didn't know the cp was there in front of pistons... pauls automotive did all the work. and tune, in cincinnati.. and i have the receipts on the whole motor build. for whoever buys the car
 
Last edited:

03RedCobra

Active Member
Established Member
Joined
Nov 23, 2003
Messages
1,205
Location
Palo Alto, CA
That is a VERY reasonable price for a Cobra with a built-up engine !!

All those folks running around, buying up Cobras at 20,000 or so, slapping on a kenne-bell blower....they will eventually be doing something to the engine. After they throw 4,000 into the blower, a few more thousand for other Mods, and THEN at least 5000 for a decent new motor, they will realize, "Wow, that guys price was actually pretty good, I wish I had bought that car instead".

Believe, I know, I speak from experience, I need a new Motor:(
 

Users who are viewing this thread



Top