2007 GT500 vs 2011 Mustang GT

MrSplat

New Member
Established Member
Joined
Nov 5, 2012
Messages
85
Location
Saint Louis
Last edited:

srt10ram

The Little 2v That Could
Established Member
Joined
Feb 13, 2011
Messages
649
Location
Nola
lmao driver mod needed on gt500, not trying to hate on the 5.0, but that shelby is a 120+ car and should've won.
 
Last edited:

REPCobra10

New Member
Established Member
Joined
Aug 15, 2005
Messages
3,132
Location
Tamarac, FL
lmao driver mod needed on gt500, not trying to hate on the 5.0, but that shelby is a 120+ car and should've won.

Bro, this is all that you need to know...

BadAss5-0.jpg


Have you not heard? :beer:
 

srt10ram

The Little 2v That Could
Established Member
Joined
Feb 13, 2011
Messages
649
Location
Nola
Bro, this is all that you need to know...

BadAss5-0.jpg


Have you not heard? :beer:
hold up, is that actually on your car?:lol1:

oh i've heard, these new 5.0's are unbeatable, only the almighty gtr's are faster.;-)
 
Last edited:

MrSplat

New Member
Established Member
Joined
Nov 5, 2012
Messages
85
Location
Saint Louis
The driver would definitely need some practice, but I've would expect the roll races to be a little closer. Then again he went 12.0 @ 119 or around there on a slick. So most replies are correct.
 

Third Honk

It's OK, I'm Handsome
Established Member
Joined
Sep 16, 2005
Messages
1,828
Location
Oklahoma City
There's a guy local that has a 5.0 with a rousch blower @ 8si, exhaust and e85 and the thing is trapping 134 mph, at sea level it would be even better. Those cars are amazing and I'm for sure going with more compression on my next build.
 

GT500R

Member
Established Member
Joined
Jan 14, 2007
Messages
675
Location
New England
Just picked up the car and have been wanting to see what I could do vs a bolt GT500 and myself only having a tune.
2011 GT mods - AED tune (says GT500 axle back but it's wrong)
2007 GT500 mods - pulley, intake, clutch, 3.73's

I was on the stock 235's while he had 275 Nitto 555's.

Could someone embed this for me.

Good job beating the driver ;-)

GT500 spinning the tires... roasting the tires from a dead stop race then missing 3rd... then the car bucking up and down heavily from 1st to 2nd confirmed the conspiracy...
 

MrSplat

New Member
Established Member
Joined
Nov 5, 2012
Messages
85
Location
Saint Louis
No, car is an M6. Thanks for the compliment! And beating the driver is fine. I, again, just wanted to see how I stacked up. All in all it was a good time.
 

Users who are viewing this thread



Top